19J6 Tubes for Pete Millett's Starving Student Amp

Captn Dave · 05:19 AM

Pairs of NIB NOS 19j6 tubes available for Starving Student headphone amp builds.

RCA, Emerson and Ragland brands.

Trade for something interesting or $20 a pair.

All are tested on B&K 707.

Captn Dave · 4th March 2013, 04:26 AM

I'll throw in some NOS 7 pin tube sockets too.

ki4gbc · 5th March 2013, 03:42 PM

pm'd would like to get a pair of these tubes

Captn Dave · 12:34 AM

Okay , So here is what I have left now.

I have a mismatched set of Phillips and Tungsol. The structure is very similar and the both use horizontal getters. They have the same style of flashing. There is a difference in the angle of the getter support. My guess is same factory, different date. Test 82-120 Phillips and 109-120 Tungsol.

I have a pair of RCAs that test 75-108 and 98-117.

I have a single RCA Victor that tests 115-82

My take is that since the sections are used in parallel, matching is not that important. You be the judge.

Captn Dave · 7th March 2013, 12:30 AM

I shipped out all of the tubes ordered to date. With the exception of the international order, you should see them in a week or less.

Good luck with your builds.

2nd March 2013, 05:07 AM	#1
Captn Dave diyAudio Member Join Date: Jun 2008	19J6 Tubes for Pete Millett's Starving Student Amp Pairs of NIB NOS 19j6 tubes available for Starving Student headphone amp builds. RCA, Emerson and Ragland brands. Trade for something interesting or $20 a pair. All are tested on B&K 707. Last edited by Captn Dave; 2nd March 2013 at 05:19 AM.

6th March 2013, 12:31 AM	#4
Captn Dave diyAudio Member Join Date: Jun 2008	Okay , So here is what I have left now. I have a mismatched set of Phillips and Tungsol. The structure is very similar and the both use horizontal getters. They have the same style of flashing. There is a difference in the angle of the getter support. My guess is same factory, different date. Test 82-120 Phillips and 109-120 Tungsol. I have a pair of RCAs that test 75-108 and 98-117. I have a single RCA Victor that tests 115-82 My take is that since the sections are used in parallel, matching is not that important. You be the judge. Last edited by Captn Dave; 6th March 2013 at 12:34 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Low voltage 12AU7 (19J6) -- re "starving"	jackinnj	Tubes / Valves	22	1st February 2013 02:39 AM
Pete Millett's Bench Power Supply	Jaimo	Equipment & Tools	1	12th May 2012 05:06 AM
Pete Millett's Low Mu Preamp	wirewiggler	Swap Meet	2	28th May 2011 08:21 PM
6JM6 Infomation for Pete Millett's DCPP Amp	Dagwood	Tubes / Valves	23	29th August 2010 09:19 PM
Pete Millett's 829B amp -> monoblocks	lochness	Tubes / Valves	3	17th June 2008 12:30 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th March 2013, 04:26 AM	#2
Captn Dave diyAudio Member Join Date: Jun 2008	I'll throw in some NOS 7 pin tube sockets too.

5th March 2013, 03:42 PM	#3
ki4gbc diyAudio Member Join Date: Mar 2013	pm'd would like to get a pair of these tubes

7th March 2013, 12:30 AM	#5
Captn Dave diyAudio Member Join Date: Jun 2008	I shipped out all of the tubes ordered to date. With the exception of the international order, you should see them in a week or less. Good luck with your builds.