• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Proac Response 2.5 clone, crossovers.

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
ivigueras

ivigueras

Member
Joined 2006
For sale, in perfect working condition, the crossover for the DIY Proac 2.5

Now, the crossovers have been put up for auction on ebay:

http://www.ebay.com/itm/26127676076...l?_from=R40&_sacat=0&_nkw=261276760762&_rdc=1

The crossover is based on the Troels Gravesen design for the Scan Speak 9500 and 8535, with crossover frecuency at 3KHz.

I sell it because I have upgrade the speakers to active bi-amp with active filters.

All components are high-end as you can see listed below. Only the components value are far over 250$. The board has been protected in the cooper side to prevent oxidation.

SOLEN 8.2uF-400VDC POLYPROPYLENE CAPACITOR
AURICAP 4.7uF-400V CAPACITOR
MILLS 2.2R 12W MRA12 Resistor (RES-M1100)
MILLS 10R 12W MRA12 Resistor (RES-M1180)
MILLS 4.7R 12W MRA12 Resistor (RES-M1135)
JANTZEN 1.80mH Jantzen Audio Cross Coil
JANTZEN 0.47mH Jantzen Audio Cross Coil
JANTZEN 0.22mH Jantzen Audio Air cored coil

Contact to Ignacio: ivigueras@terra.es
You can see my seller and buyer profile in eBay. User: ivigueras. http://myworld.ebay.es/ivigueras

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom