Free for anyone interested or knows anyone who might be interested in Newcastle NSW Australia. Pickup only for the lot and I'll leave this thread open for a week (12/12/12) before I throw them in the bin.
2/ NXV-200 amp modules (1 has input resistor changed from SMD to metal film)
1/ Altronics H0545 300mm 0.37C/W Heatsink for above drilled and tapped
1/ Harbuch Antrim H3417 toroidal transformer 300VA 30V-0-30V (2x120V primary wired in series for 240V)
1/ Jaycar MT2086 toroidal transformer 20VA 15V-0-15V
1/ Altronics M4918 toroidal tranformer 30VA 18V-0-18V
1/ Altronics M5118 toroidal transformer 80VA 18V-0-18V
1/ Hammond 229D16 transformer 48VA series 16V parallel 8V
1/ Alps RK27 motorised pot 20KAX2
1/ Elma 04-1261 switch 6 position adjustable 2 pole
1/ B1 buffer no cap version for 10K-20K pot on veroboard (no power supply)
All these are used and are/were in working order.
2/ NXV-200 amp modules (1 has input resistor changed from SMD to metal film)
1/ Altronics H0545 300mm 0.37C/W Heatsink for above drilled and tapped
1/ Harbuch Antrim H3417 toroidal transformer 300VA 30V-0-30V (2x120V primary wired in series for 240V)
1/ Jaycar MT2086 toroidal transformer 20VA 15V-0-15V
1/ Altronics M4918 toroidal tranformer 30VA 18V-0-18V
1/ Altronics M5118 toroidal transformer 80VA 18V-0-18V
1/ Hammond 229D16 transformer 48VA series 16V parallel 8V
1/ Alps RK27 motorised pot 20KAX2
1/ Elma 04-1261 switch 6 position adjustable 2 pole
1/ B1 buffer no cap version for 10K-20K pot on veroboard (no power supply)
All these are used and are/were in working order.
Free for anyone interested or knows anyone who might be interested in Newcastle NSW Australia. Pickup only for the lot and I'll leave this thread open for a week (12/12/12) before I throw them in the bin.
2/ NXV-200 amp modules (1 has input resistor changed from SMD to metal film)
1/ Altronics H0545 300mm 0.37C/W Heatsink for above drilled and tapped
1/ Harbuch Antrim H3417 toroidal transformer 300VA 30V-0-30V (2x120V primary wired in series for 240V)
1/ Jaycar MT2086 toroidal transformer 20VA 15V-0-15V
1/ Altronics M4918 toroidal tranformer 30VA 18V-0-18V
1/ Altronics M5118 toroidal transformer 80VA 18V-0-18V
1/ Hammond 229D16 transformer 48VA series 16V parallel 8V
1/ Alps RK27 motorised pot 20KAX2
1/ Elma 04-1261 switch 6 position adjustable 2 pole
1/ B1 buffer no cap version for 10K-20K pot on veroboard (no power supply)
All these are used and are/were in working order.
Sorry to see them thrown out Pete
I hope someone is able to get the nxv200 modules
Cheers
Anthony
Aussie Amplifiers
I will take it if it is still available. I am just wee bit down south if still eligible
Sorry for the double post. I am just get a little bit over excited but did not realised that it is for Novocastrian only but hey i am a Jets supporter
quan
AnthonySorry to see them thrown out Pete
I hope someone is able to get the nxv200 modules
Cheers
Anthony
Aussie Amplifiers
We have a taker so no tears required. They will be very happy with this nice amp. I'm gettting rid of all my DIY electronics so not a hit on the NXV200.... even my beloved AKSAs have gone.
Cheers Peter
Anthony
We have a taker so no tears required. They will be very happy with this nice amp. I'm gettting rid of all my DIY electronics so not a hit on the NXV200.... even my beloved AKSAs have gone.
Cheers Peter
That's great Pete, good to hear that they have gone to a good home...
Sorry to hear you have retired from all of this though.
All the best mate!
Anthony
Aussie Amplifiers
Sorry to hear you have retired from all of this though.
All the best mate!
Anthony
Aussie Amplifiers
Thanks Anthony and it is appreciated. Time for me to move on but had a blast while I was doing it. Health issues (life changing not life threatening) helped with the change of direction and new pursuits.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.