FS: MyrefC V1.3 LM3886 monoblock power amps - ultimate BOM parts
Purchased these very well made amps from apoopoo999 (thanks again), to pair with my very high sensitivity GOTO horns, but come to realize they aren't what I was after. Was wanting something with a lower noise design. Maybe something like the F5?
I know the amps come with blackgates, elna silmics, and obligato input caps.
So anyways, these are unfortunately up for sale. Currently wired for 110V, but can be wired for 220V.
I'm after $600 + postage costs from Australia.
Cheers!
Purchased these very well made amps from apoopoo999 (thanks again), to pair with my very high sensitivity GOTO horns, but come to realize they aren't what I was after. Was wanting something with a lower noise design. Maybe something like the F5?
I know the amps come with blackgates, elna silmics, and obligato input caps.
So anyways, these are unfortunately up for sale. Currently wired for 110V, but can be wired for 220V.
I'm after $600 + postage costs from Australia.
Cheers!
Attachments
Last edited:
This appears to be the manual for the modules in your amps: http://www.twistedpearaudio.com/docs/legacy/tpm/tpm-lm3886.pdf
Based on the above reading, I'm going to have to pass as my speakers offer a heavy 4ohm load, which doesn't seem to be ideal for these awesome looking amps.
Based on the above reading, I'm going to have to pass as my speakers offer a heavy 4ohm load, which doesn't seem to be ideal for these awesome looking amps.
I used 22 - 0 - 22 400va trafos for these amps so they will easily drive 4ohms at 68w without breaking a sweat.
You can read more about the amps here
http://www.diyaudio.com/forums/group-buys/160768-myref_c-ultimate-bom.html
You can read more about the amps here
http://www.diyaudio.com/forums/group-buys/160768-myref_c-ultimate-bom.html
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.