• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: TP Buffalo II + Trident + 2xAVCC + Volumite FW

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Dear All:

Just upgraded to BIII-SE, so this old faithful friend Buffalo II need a new home, 80Mhz version but working with 356/384kHz/5.6Mhz sampling rate, rock solidly locked and singing, so no need to upgrade to 100Mhz Version until B3-SE arrival.

Three Trident Shunt Regulator for 3.3V/3.3V/1.2V and two AVCC module (one for spare) and all Cap, Ferrite Beads removed for Trident Upgrade retained and included, so you can restore to original BII with it's on-board LT regulator, and move the trident and AVCC module to BIII or other project.

Volumite Firmware for Buffalo II included so just add one Potentiometer, Project PCB and 4 wires (3.3V available from BII PCB, no regulator required) then you can add High Quality digital volume control to BII)

All together let go at price of less than one single BII PCB, USD $240, Free Shipping, accept Paypal only.

Thanks for viewing and have a Happy Thanksgiving Day.
 

Attachments

  • PB231748.JPG
    PB231748.JPG
    333.3 KB · Views: 234
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.