• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Stainless knobs

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
V

vilts

Member
Joined 2005
knivesandengraving.com
I have 5 stainless steel knobs for sale. Big ones are 12EUR including shipping to anywhere, small ones are 8EUR including shipping. Big ones weigh around 350 grams or so.

Dimensions are following from left to right:
* d = 45mm, h = 37mm, shaft hole d = 6,1mm
* d = 45mm, h = 35mm, shaft hole d = 6,1mm
* d = 25mm, h = 30mm, shaft hole d = 6,4mm (all 3)

An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


First big one has one very minor problem - I made the shaft fixing hole at wrong place the first time and had to cover it up, but it shows up a little.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom