• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Sprague 10 uf 50v 5% film capacitors

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
$10.00 each. More available.

NOS Sprague Vishay 632P106X5050 Metalized Polycarbonate film capacitors. 10uf 50 volt 5% tolerance. These were made to incredibly high standards for military aircraft. They are discontinued due to the world wide shortage of Metalized polycarbonate film. They retail for $312.00 each. They are excellent as coupling capacitors or used in speaker crossovers. I'll try to answer any questions you may have. I can email the manufacturers data sheet.

Size: .48" circumference X 1.31" long.

FEATURES

• Superior performance • High efficiency • High stability • High reliability • Rugged construction • Small size

DC Life Test: 140% of rated voltage for 250 hours at + 125°C. No open or short circuits. No visible damage. Maximum Δ CAP ± 5%. Minimum IR = 30% of initial limit. Maximum DF = 0.5%. Humidity Test: 95% relative humidity at + 40°C for 240 hours. No visible damage. Maximum Δ CAP ± 5%. Minimum IR = 50% of initial limit. Maximum DF = 0.5%

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55°C to + 125°C. Capacitance: 10.0μF Capacitance Tolerance: ± 5% DC Voltage Rating: 50 WVDC AC Voltage Rating: See AC Voltage Rating table. Dissipation Factor: 0.25% maximum. Voltage Test: 200% of rated voltage for 1 minute. Insulation Resistance: At + 25°C: 50,000 Megohm - Microfarads, or 100,000 Megohm minimum. At + 85°C: 2,000 Megohm - Microfarads, or 4000 Megohm minimum. At + 125°C: 250 Megohm - Microfarads or 500 Megohm minimum Vibration Test (Condition D): No mechanical damage. No short, open or intermittent circuits.

PHYSICAL CHARACTERISTICS

Lead Pull: 5 pounds (2.3 kilograms) for one minute. No physical damage. Lead Bend: After three complete consecutive bends, no damage. Marking: Sprague® trademark, type or part number, capacitance and voltage.
 

Attachments

  • DSC_0175.jpg
    DSC_0175.jpg
    302.6 KB · Views: 138
  • DSC_0176.jpg
    DSC_0176.jpg
    234.2 KB · Views: 147
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.