WTB bridging adapters

rselby · 1st September 2012, 11:54 PM

I have (3) amps that I wanna run mono...need (3) external bridging adapters( or something to invert one of the input signal) via RCA cables

rselby · 9th September 2012, 01:40 PM

are these things made anymore?? I have seen where its a DIY project..but I dont kno how to build one

theAnonymous1 · 9th September 2012, 03:10 PM

I'ts a really simple circuit; the most difficult part would be providing the dual supplies for the op-amps. Might be able to use single supply op-amps and power from 12V, but I've never tried.

Bridging Adapter For Power Amps

ByronInLawrence · 9th September 2012, 03:13 PM

Bridging Adapter For Power Amps
I've built many projects from Rod Elliott. They are quite good. Instructions are usually good too. You can probably put this together with little or no experience.

Funny. We both recommended the same product.

andrewlebon · 9th September 2012, 03:21 PM

hi selby
greetings i can send on mail bridge adaptor please excuse because of forum rules
warm regards
andrew lebon

1st September 2012, 11:54 PM	#1
rselby diyAudio Member Join Date: Mar 2012 Location: jacksonville FL	WTB bridging adapters I have (3) amps that I wanna run mono...need (3) external bridging adapters( or something to invert one of the input signal) via RCA cables

9th September 2012, 03:10 PM	#3
theAnonymous1 diyAudio Member Join Date: Feb 2004 Location: Anonymityville	I'ts a really simple circuit; the most difficult part would be providing the dual supplies for the op-amps. Might be able to use single supply op-amps and power from 12V, but I've never tried. Bridging Adapter For Power Amps __________________ "If you don't like funerals don't kick sand in Ninja's face." - Ninja

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: mic bridging transformers	mobyd	Swap Meet	0	6th January 2010 09:21 AM
WTB - 4, 5 and 6 Pin Adapters and Blanks Cards for RCA WT-110A Tester	baileyler	Swap Meet	0	24th March 2009 05:17 PM
3 - AD825 adapters	mattjk	Swap Meet	0	9th March 2005 10:15 PM
Surfboards adapters	carlmart	Solid State	2	29th March 2003 10:25 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th September 2012, 01:40 PM	#2
rselby diyAudio Member Join Date: Mar 2012 Location: jacksonville FL	are these things made anymore?? I have seen where its a DIY project..but I dont kno how to build one

9th September 2012, 03:13 PM	#4
ByronInLawrence diyAudio Member Join Date: Nov 2010 Location: Lawrence, a nice little college town in Kansas	Bridging Adapter For Power Amps I've built many projects from Rod Elliott. They are quite good. Instructions are usually good too. You can probably put this together with little or no experience. Funny. We both recommended the same product.