Hi
For sale my KT88 amplifier , selling as parts but it is in working condition ( it sounds good with 88-90dB speakers , unfortunately I bought Kef speakers which are 86dB(84dB true measurement) and it doesn't have guts to drive them.
.Employs:
- 4xKT88 (almost new Gold Lion ,but couple have broken spigots) 1x2C51 (Western Electrics JW) tubes
- Lundahl LL1679PP output transformers
- custom made power transformer (2x340V (400mA) ,2x100V,4x6.3V) and 2x power chokes (8H, 400mA)
- interstage Lundahl transformers LL1660/7.5mA
- dual mono power supplies with Mundorf capactitors- over 1000uF per channel
- Shinkoh and Mills and Kiwame resistors
- TenTlabs negative bias supply
- TenTlabs heater supply
- 2 x HexFred 1200V/15A based rectification
- Elma input selector switch
- Seiden switch based volume attenuator 10K
- CMC binding posts
- CMC tube sockets
- chassis ( botom plate fixings need re-taping )
- transformer covers ( little scratches on the top probably need new coating)
Whole thing weight 35-40kg so shipping would be very expensive
Sensible offers please , if I receive good ofers for parts I might strip amplifier down
For sale my KT88 amplifier , selling as parts but it is in working condition ( it sounds good with 88-90dB speakers , unfortunately I bought Kef speakers which are 86dB(84dB true measurement) and it doesn't have guts to drive them.
.Employs:
- 4xKT88 (almost new Gold Lion ,but couple have broken spigots) 1x2C51 (Western Electrics JW) tubes
- Lundahl LL1679PP output transformers
- custom made power transformer (2x340V (400mA) ,2x100V,4x6.3V) and 2x power chokes (8H, 400mA)
- interstage Lundahl transformers LL1660/7.5mA
- dual mono power supplies with Mundorf capactitors- over 1000uF per channel
- Shinkoh and Mills and Kiwame resistors
- TenTlabs negative bias supply
- TenTlabs heater supply
- 2 x HexFred 1200V/15A based rectification
- Elma input selector switch
- Seiden switch based volume attenuator 10K
- CMC binding posts
- CMC tube sockets
- chassis ( botom plate fixings need re-taping )
- transformer covers ( little scratches on the top probably need new coating)
Whole thing weight 35-40kg so shipping would be very expensive
Sensible offers please , if I receive good ofers for parts I might strip amplifier down
Last edited:
£100 +p&pHow much for the interstage Lundahl transformers LL1660/7.5mA?
but I need time to decide before I start stripping it down
£100 +p&p
but I need time to decide before I start stripping it down
No problem, let us know. Sounds like a really nice amp! I would try and find a home for it before even selling it in parts
Ciao!
Do
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.