• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Pair of Single Ended OPTs for EL84/6V6

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
J

jono1

Member
Joined 2009
I have a pair of working single-ended audio transformers that I removed from a Tandberg 74B tape deck.

The deck used single EL84s in each output. It was rated for 3 watts/channel.

The SAMS data show that these have 5600 ohm primaries with 3-4 ohm secondaries, or about 11K with 8 ohms.

There is also an unused tap on the primary side with the ratio of 44/56, which might make for a screen tap and higher output with reduced distortion.

$50 for the pair.

If interested, please send me an e-mail. Thanks.
 

Attachments

  • Tandberg Iron.jpg
    Tandberg Iron.jpg
    150.4 KB · Views: 108
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom