Cleaning out my parts bins so I can afford parts I need. All components have seen very little use in crossover experiments. All have long leads with some solder marks.
2x 50uf 400VDC PB-MKP-FC Solen Fastcaps $20
2x 100uf 400VDC PB-MKP-FC Solen Fastcaps $40
2x 1mH 14AWG copper foil inductors by Alpha-Core $30
2x .12mH 16AWG hepa-litz inductors by Solen $5
2x .27mH 16AWG hepa-litz inductors by Solen $10
2x .36mH 14AWG hepa-litz inductors by Solen $15
$100 for all.
2x 50uf 400VDC PB-MKP-FC Solen Fastcaps $20
2x 100uf 400VDC PB-MKP-FC Solen Fastcaps $40
2x 1mH 14AWG copper foil inductors by Alpha-Core $30
2x .12mH 16AWG hepa-litz inductors by Solen $5
2x .27mH 16AWG hepa-litz inductors by Solen $10
2x .36mH 14AWG hepa-litz inductors by Solen $15
$100 for all.
If anyone wants to trade I need components to build a modified Altec model19 crossover. I have no preference of brand. I don't care how much snake oil is in the components offered but I'd like them to be of equal or better quality to Solen.
The components needed are:
Inductors, I prefer 16 gauge or bigger
2x 2.7mH
2x .77mH
2x .3mH
Capacitors,
2x 16uf
2x 8uf
2x 6uf
2x 4uf
Resistors, 10W+ non-inductive
4x 4ohm
2x 3ohm
2x 2ohm
The components needed are:
Inductors, I prefer 16 gauge or bigger
2x 2.7mH
2x .77mH
2x .3mH
Capacitors,
2x 16uf
2x 8uf
2x 6uf
2x 4uf
Resistors, 10W+ non-inductive
4x 4ohm
2x 3ohm
2x 2ohm
Last edited:
Howdy! They're all interesting enough. Smaller caps work too, I don't mind paralleling them to get where I need to be. I need some good female RCA and chassis mount binding posts to finish an amplifier, I put a lot of time into it's case so quality matters. That's it for stuff I actually need. I usually don't know I "need" something until I see it and fall in love.
Hi
I'm interested with your inductor
2x 1mH 14AWG copper foil inductors by Alpha-Core $30
2x .12mH 16AWG hepa-litz inductors by Solen $5
2x .27mH 16AWG hepa-litz inductors by Solen $1
Do you want to trade with me or I buy your inductor
- resistor sfernice RLP 10 (2,3 and 3.9 ohm) non inductive @ US$ 8
- capacitor k73-16 PEPT 2.2uf 250 @$3; 4,7uf 400 @$5; 10uf 400 @$7
Thank you, best regards
I'm interested with your inductor
2x 1mH 14AWG copper foil inductors by Alpha-Core $30
2x .12mH 16AWG hepa-litz inductors by Solen $5
2x .27mH 16AWG hepa-litz inductors by Solen $1
Do you want to trade with me or I buy your inductor
- resistor sfernice RLP 10 (2,3 and 3.9 ohm) non inductive @ US$ 8
- capacitor k73-16 PEPT 2.2uf 250 @$3; 4,7uf 400 @$5; 10uf 400 @$7
Thank you, best regards
Cleaning out my parts bins so I can afford parts I need. All components have seen very little use in crossover experiments. All have long leads with some solder marks.
2x 50uf 400VDC PB-MKP-FC Solen Fastcaps $20
2x 100uf 400VDC PB-MKP-FC Solen Fastcaps $40
2x 1mH 14AWG copper foil inductors by Alpha-Core $30
2x .12mH 16AWG hepa-litz inductors by Solen $5
2x .27mH 16AWG hepa-litz inductors by Solen $10
2x .36mH 14AWG hepa-litz inductors by Solen $15
$100 for all.
Hi
I'm interested with your inductor
.......2x 1mH 14AWG copper foil inductors by Alpha-Core $30
.....
Thank you, best regards
I will buy the pair of 14 AWG foil inductors for $30 if Pocoyo does not want them.
Francois
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.