diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Swap Meet (http://www.diyaudio.com/forums/swap-meet/)
-   -   Turntable Bearings (http://www.diyaudio.com/forums/swap-meet/209166-turntable-bearings.html)

dod996 19th March 2012 03:36 PM

Turntable Bearings
 
I have a few turntable bearings for sale. The bearing are machined from bronze and honed to fit the spindle. The spindle is machined from 440C stainless steel, hardened then ground. I will include a straight pin and a threaded pin for a record clamp. The thrust disks are machined from delrin.
Iím asking 180.00 OBO

http://i1191.photobucket.com/albums/...6/IMG_2369.jpgTony

dnewma04 19th March 2012 10:47 PM

Is this designed to work with a particular platter or mean to be used with a DIY platter built to spec?

dod996 19th March 2012 11:07 PM

DIY teres style

woodturner-fran 20th March 2012 12:34 AM

Is the fit the same as a Teres? Tight tolerance and a few hours with the platter on for the spindle to seat home?


Fran

dod996 20th March 2012 12:42 AM

Yes the fit and runout are very close

Migueldajer 16th September 2014 01:30 AM

Do you still have this bearing?
 
I know it's being a while but do you still have these bearings? Looking to get a teres style bearing. Thanks.


All times are GMT. The time now is 03:39 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2