FS: EHAMP08 remote controled Headphone Amp PCB or full kit. - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th March 2012, 04:32 PM   #1
Frex is offline Frex  France
diyAudio Member
 
Join Date: Nov 2009
Arrow FS: EHAMP08 remote controled Headphone Amp PCB or full kit.

Hello all,

Some times ago, i have designed a little headphone amplifier for me and some of my audio enthusiast friends. It's name is EAMP08.
A that time, i was thinking built some others but i had never find the time to finish them.
So now, i have many bare PCB of this project and also all parts for about ten.
I precise that this is not a commercial project.

The main features are :
_Texas Instruments TPA6120 headphone output driver.
_Analog Devices AD8599 input buffer.
_Cirrus Logic CS3310 digital volume control.
_RC5 programmable remote control for mute and volume.
_115 or 230Vac input voltage.
_Line and line out (to control volume of power amplifier).

Below, some documents and photos of this project.
EHAMP08 functional synoptic.
EHAMP08 Schematic.
EHAMP08 Manual.

The printed circuits board.
Click the image to open in full size.

The Amplifier internal view.
Click the image to open in full size.

A complete and finished amplifier.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.


If DIYers are interested, i can sale bare PCB (with the TPA6120 already soldered), and also parts kit including drilled enclosure.
Note that the amplifier include a micro-controller that need a PIC IC programming hardware !(like PICkit or ICD2..)

The price for one PCB including the TPA6120 pre-soldered and the worldwide shipping will be 15.
I will send also with all bare PCB, a full zipped folder where you will find all you need to build the project.
If you look for a complete kit including all parts and drilled enclosure, please PM me.
Regards.

If you have any question about the design, don't hesitate !

Frex.

Regards.

Frex
  Reply With Quote
Old 19th March 2012, 07:41 PM   #2
Frex is offline Frex  France
diyAudio Member
 
Join Date: Nov 2009
Arrow EHAMP08 full kit info

Hello,

Some infos about the kit;

The EHAMP08 full kit include :
- The printed circuit board with the TPA6120 pre-soldered.
- All electronics parts.
- The Hammond enclosure (1455N1601) with drilled front and rear panels(no silkscreen),
feet , aluminum button, IR lens, mounting hardware,...
- A complete zipped folder of the EHAMP08, with all needed files including bill of material, silkscreen, schematic, source code of uC and many others files.

It doesn't include :
_The power cord.
_The hole that fix the PCB on the bottom of the enclosure must be made (3mm hole) ( the drilling map is include in zipped folder).


The price for a bare PCB with the TPA6120 IC pre-soldered is 15 .
(include worldwide shipping in priority letter without insurance, and Paypal fees)
For convenience, i can provide also the bare board with the PIC uC already soldered and programmed for additional 10 (including the IC).


The price for a complete kit with the TPA6120 IC pre-soldered and PIC uC pre-programmed is 110
(include worldwide shipping in priority letter without insurance, and Paypal fees)



Don't hesitate if you have any question.
Regards.

Frex
  Reply With Quote
Old 22nd March 2012, 04:57 AM   #3
Frex is offline Frex  France
diyAudio Member
 
Join Date: Nov 2009
Hi all,

First full kit sold...
9 kits remaining.
About 20 bare PCB remaining..

Frex
  Reply With Quote
Old 28th May 2012, 09:39 AM   #4
Frex is offline Frex  France
diyAudio Member
 
Join Date: Nov 2009
Hi all,

6 kits remaining.
Some bare PCB's with TPA6120 soldered also available.
Only 15 including worldwide shipping and a complete design folder.
(Others designs PCB available, see my signature below.)

Frex
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Remote Volume Control Kit by Silicon Chip Magazine Australia jamesjung21 Swap Meet 4 27th October 2011 04:17 AM
FS: Headphone amp PCB TPA6120+OPA2134 mravlcax Swap Meet 0 25th January 2009 02:43 PM
FS:Marantz 7C Kit with remote control YFW Swap Meet 0 1st June 2007 05:12 PM
brand new cdpro2m, control board and display/remote kit FS noisenyc Swap Meet 3 1st February 2005 10:06 PM
FS: Alps RK27 motorised volume pot with remote controller PCB ready to fit in amp rabbitz Swap Meet 3 8th September 2004 03:09 PM


New To Site? Need Help?

All times are GMT. The time now is 05:12 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2