• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Salas SSHV1

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
Stixx

Stixx

Member
Joined 2003
original-ton.net
SOLD: Salas SSHV1 shunt reg FULL BUILD!

Up for sale is one of my Salas shunt regs... perfectly suited for line stages, headphone amplifiers
or anything else that consumes around 65mA max.
Can supply a range of 150 -275V approx., current set resistor is socketed to easily adjust current
to the desired value. Tested and ready for use!

The best regulator for ultra low noise, very high bandwidth and ultra low output resistance...
see the threads on Diyaudio!

Needs rectified and filtered DC in of about 20V more than the desired Vout.

Only very good parts used throughout incl. premium Jantzen Superior-Z caps for the critical positions
(a 50$ value itself). Heatsink and custom made adapter included.

Asking 85$ excluding shipping.

Shipping worldwide, though expensive across the ocean :(
Shipping to Europe pls. ask (options available)

http://s1.directupload.net/images/user/120310/wpclehi5.jpg

http://s1.directupload.net/images/user/120310/94ddshn9.jpg
 
Last edited:
Stixx

Stixx

Member
Joined 2003
original-ton.net
Hi Cabaco,

I don't know the Tube-i-zator pcb very well, but when it is a tube output stage you can sure use the Salas shunt. Do you have a schematic of the Tube-i-zator? Then I could check to be sure how to connect it.
I am using the Salas shunt in two of my headphone amplifiers (Aikido parafeed and SE with output transformers), and they sound fabulous!

Please send a PM with your email adress!

Obrigado
Oliver
 
DQ828

DQ828

Member
Joined 2010
Stixx said:
FS: Salas SSHV1 shunt reg FULL BUILD!

Up for sale is one of my Salas shunt regs... perfectly suited for line stages, headphone amplifiers
or anything else that consumes around 65mA max.
Can supply a range of 150 -275V approx., current set resistor is socketed to easily adjust current
to the desired value. Tested and ready for use!

The best regulator for ultra low noise, very high bandwidth and ultra low output resistance...
see the threads on Diyaudio!

Needs rectified and filtered DC in of about 20V more than the desired Vout.

Only good parts used throughout incl. premium Jantzen Superior-Z caps for the critical positions
(a 50$ value itself). Heatsink and custom made adapter included.

Asking 85$ excluding shipping.

Shipping worldwide, though expensive across the ocean :(
Shipping to Europe pls. ask (options available)

http://s1.directupload.net/images/user/120310/wpclehi5.jpg

http://s1.directupload.net/images/user/120310/94ddshn9.jpg
Click to expand...

Where did you buy the sockets you used for the current resistor?

What are they called?

thanks

David
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom