FS : Spring cleanup! Legato 3.1 and Placid BP + more - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th March 2012, 04:54 AM   #1
Just DIY!
diyAudio Member
 
pinnocchio's Avatar
 
Join Date: Sep 2010
Location: Montreal
Default FS : Spring cleanup! Amplifiers, preamps, etc...

Got 1 TPA legato 3.1 with output buffers and 1 TPA Placid BP (not the Placid HD)

All fully assembled and working beautifully. Would like to sell together. They're already all adjusted for BII or BIII

Asking 100$ + shipping + 3% paypal

Click the image to open in full size.


Also have a fully build and working Audio F4 clone preamp (ver 1.1). This isis the assembled PCB only. The PSU was bypassed to use external PSU. If needed, I can resolder the cut traces to use the onboard regulator. I have a few opamps available. Just PM me and I will let you know which ones I have and you can chose. I'll include for free!
20$ + shipping

Click the image to open in full size.

Also have a PGA2311 with LCD. The PSU was bypassed to use external PSU. The onboard one sucked... The input selector (3 inputs) and volume control works well. Remote is included. I still have most of the parts for the onboard PSU if needed. Currently configured for external +/-5V regulated supply (not included). I have the schematics and assembly guide that was included. If you have a +/- 5V supply, it is ready to work! Perfectly suited for the LM4780 amplifier on this page

PGA2311 preamplifier remote volume control Rowland ! | eBay

Asking 40$ + shipping + paypal 3%

Click the image to open in full size.


Also have LM4780 stereo amplifier. Using all Dale RN60D and CPF3. Panasonic FC, Wima. Onboard regulator. ~ 68Watts per channel, all assembled with quality components throughout and fully working! You can use the PGA2311 or JC-2 or Audio F4 preamps with this power amp to create an easy integrated and good sounding setup!

Asking 45$ + shipping

Click the image to open in full size.


Also have one Kubota bipolar regulator with large Elna for Audio 43V 10000uF, not the cheaper ones included in the kit. Only missing rectifier diodes. All assembled and fully working

Kubota low noise regulator full blown version kit !! | eBay

asking 25$ + shipping

Click the image to open in full size.


Also have this very nice ML-3/JC-2 Preamp with volume control. It has onboard shunt regulator. Sounds really good! You can use this with the LM4780 on top to form a nice integrated amp!!!
Using mostly Dale resistors, Wima and Pana FC caps! This was a kit and I replaced most parts with Mouser and Digikey parts. So all genuine!

Asking 45$ + shipping + 3% paypal

Click the image to open in full size.

Also have parts which I will post later on... Same for the pictures, will post later...

You can make me reasonable offers as well

Ciao!
__________________
PREAMPs : AMB α10 + JC-80 clone | Balanced DCB1 | LDR3x | AMPs: AMB β24 | Aleph 5 | VSSA | ML-2 | Fetzilla | Telos 390 Clone | My_Ref FE
DACs : TPA Buffalo II + OPC's NTD1 I/V | TPA OPUS + IVY III Speakers : Jim Holtz Statements | Astasia SD | Tubasson Mark 2

Last edited by pinnocchio; 13th March 2012 at 05:23 AM.
  Reply With Quote
Old 10th March 2012, 05:42 AM   #2
Just DIY!
diyAudio Member
 
pinnocchio's Avatar
 
Join Date: Sep 2010
Location: Montreal
Default Legato 3.1, Placid BP and Kubota are sold!

I still have :
PGA2311 Volume Control and Input Selector

LM4780 Amplifier

Audio F4 Clone preamp
15$ + shipping

Make me an offer!
__________________
PREAMPs : AMB α10 + JC-80 clone | Balanced DCB1 | LDR3x | AMPs: AMB β24 | Aleph 5 | VSSA | ML-2 | Fetzilla | Telos 390 Clone | My_Ref FE
DACs : TPA Buffalo II + OPC's NTD1 I/V | TPA OPUS + IVY III Speakers : Jim Holtz Statements | Astasia SD | Tubasson Mark 2
  Reply With Quote
Old 10th March 2012, 04:39 PM   #3
Just DIY!
diyAudio Member
 
pinnocchio's Avatar
 
Join Date: Sep 2010
Location: Montreal
I still have :
PGA2311 Volume Control and Input Selector

LM4780 Amplifier

Audio F4 Clone preamp
15$ + shipping

ML-3/JC-2 Preamp

Make me an offer!
__________________
PREAMPs : AMB α10 + JC-80 clone | Balanced DCB1 | LDR3x | AMPs: AMB β24 | Aleph 5 | VSSA | ML-2 | Fetzilla | Telos 390 Clone | My_Ref FE
DACs : TPA Buffalo II + OPC's NTD1 I/V | TPA OPUS + IVY III Speakers : Jim Holtz Statements | Astasia SD | Tubasson Mark 2
  Reply With Quote
Old 12th March 2012, 03:00 AM   #4
Just DIY!
diyAudio Member
 
pinnocchio's Avatar
 
Join Date: Sep 2010
Location: Montreal
Bump!

I still have :
PGA2311 Volume Control and Input Selector

LM4780 Amplifier
40$ + Shipping

Audio F4 Clone preamp
10$ + shipping

ML-3/JC-2 Preamp
38$ + Shipping
__________________
PREAMPs : AMB α10 + JC-80 clone | Balanced DCB1 | LDR3x | AMPs: AMB β24 | Aleph 5 | VSSA | ML-2 | Fetzilla | Telos 390 Clone | My_Ref FE
DACs : TPA Buffalo II + OPC's NTD1 I/V | TPA OPUS + IVY III Speakers : Jim Holtz Statements | Astasia SD | Tubasson Mark 2
  Reply With Quote
Old 12th March 2012, 01:50 PM   #5
Just DIY!
diyAudio Member
 
pinnocchio's Avatar
 
Join Date: Sep 2010
Location: Montreal
Bump!

ML-3/JC-2 Preamp has been sold!


I still have :
PGA2311 Volume Control and Input Selector

LM4780 Amplifier
40$ + Shipping

Audio F4 Clone preamp
10$ + shipping
__________________
PREAMPs : AMB α10 + JC-80 clone | Balanced DCB1 | LDR3x | AMPs: AMB β24 | Aleph 5 | VSSA | ML-2 | Fetzilla | Telos 390 Clone | My_Ref FE
DACs : TPA Buffalo II + OPC's NTD1 I/V | TPA OPUS + IVY III Speakers : Jim Holtz Statements | Astasia SD | Tubasson Mark 2
  Reply With Quote
Old 13th March 2012, 05:35 AM   #6
Just DIY!
diyAudio Member
 
pinnocchio's Avatar
 
Join Date: Sep 2010
Location: Montreal
Default Dual LM4780 + X10 buffer

I'm adding the following to the list of items to sell...

This is a dual LM4780 stereo amplifier with X10 tube buffer and speaker protection circuit onboard. This was not a kit, just a PCB and I bought all parts from Mouser, Digikey, Parts Connexion...

Large caps are CDE 22000uF 50V (per channel), using CDE Silver Mica, Mundorf Supreme, Wima MKP10, Panasonic FC, Nichicon Muse and Elna Silmic II. Resistors are Mills, PRP, Dale. Tubes are Reflektor 6H23N-EB from Parts Connexion

Just the Mundorf Supreme and Tubes alone costed over 100$ Add to this the 4x MKP10, 2x CDE 22000uF, 2LM4780... you get the idea... Just for the parts it is worth it!

I'm asking 125$ + Shipping

Click the image to open in full size.

Click the image to open in full size.

The only thing is it should be someone that knows electronics well since the LM4780 seems to be oscillating. The amp sounds really really good but the LM4780 get hot really fast. So to me this is a sign of oscillation. I never had time to spend on resolving this part since I'm juggling with too many projects...

Thanks
__________________
PREAMPs : AMB α10 + JC-80 clone | Balanced DCB1 | LDR3x | AMPs: AMB β24 | Aleph 5 | VSSA | ML-2 | Fetzilla | Telos 390 Clone | My_Ref FE
DACs : TPA Buffalo II + OPC's NTD1 I/V | TPA OPUS + IVY III Speakers : Jim Holtz Statements | Astasia SD | Tubasson Mark 2
  Reply With Quote
Old 14th March 2012, 05:20 AM   #7
Just DIY!
diyAudio Member
 
pinnocchio's Avatar
 
Join Date: Sep 2010
Location: Montreal
Bump

Make me an offer!

Thanks
Do
__________________
PREAMPs : AMB α10 + JC-80 clone | Balanced DCB1 | LDR3x | AMPs: AMB β24 | Aleph 5 | VSSA | ML-2 | Fetzilla | Telos 390 Clone | My_Ref FE
DACs : TPA Buffalo II + OPC's NTD1 I/V | TPA OPUS + IVY III Speakers : Jim Holtz Statements | Astasia SD | Tubasson Mark 2
  Reply With Quote
Old 14th March 2012, 02:45 PM   #8
Just DIY!
diyAudio Member
 
pinnocchio's Avatar
 
Join Date: Sep 2010
Location: Montreal
Bump!

I still have :
PGA2311 Volume Control and Input Selector

LM4780 Amplifier
35$ + Shipping

Audio F4 Clone preamp
FREE + shipping

Dual LM4780 + X10 Tube buffer
110$ + 3% paypal + Shipping
__________________
PREAMPs : AMB α10 + JC-80 clone | Balanced DCB1 | LDR3x | AMPs: AMB β24 | Aleph 5 | VSSA | ML-2 | Fetzilla | Telos 390 Clone | My_Ref FE
DACs : TPA Buffalo II + OPC's NTD1 I/V | TPA OPUS + IVY III Speakers : Jim Holtz Statements | Astasia SD | Tubasson Mark 2
  Reply With Quote
Old 16th March 2012, 04:47 AM   #9
Just DIY!
diyAudio Member
 
pinnocchio's Avatar
 
Join Date: Sep 2010
Location: Montreal
BUMP!
__________________
PREAMPs : AMB α10 + JC-80 clone | Balanced DCB1 | LDR3x | AMPs: AMB β24 | Aleph 5 | VSSA | ML-2 | Fetzilla | Telos 390 Clone | My_Ref FE
DACs : TPA Buffalo II + OPC's NTD1 I/V | TPA OPUS + IVY III Speakers : Jim Holtz Statements | Astasia SD | Tubasson Mark 2
  Reply With Quote
Old 16th March 2012, 08:31 PM   #10
Just DIY!
diyAudio Member
 
pinnocchio's Avatar
 
Join Date: Sep 2010
Location: Montreal
Default New pricing for what is left...

New pricing for what is left...

PGA2311 Volume Control and Input Selector
35$ + Shipping

LM4780 Amplifier
30$ + Shipping

Audio F4 Clone preamp
FREE + shipping

Dual LM4780 + X10 Tube buffer
100$ + 3% paypal + Shipping
__________________
PREAMPs : AMB α10 + JC-80 clone | Balanced DCB1 | LDR3x | AMPs: AMB β24 | Aleph 5 | VSSA | ML-2 | Fetzilla | Telos 390 Clone | My_Ref FE
DACs : TPA Buffalo II + OPC's NTD1 I/V | TPA OPUS + IVY III Speakers : Jim Holtz Statements | Astasia SD | Tubasson Mark 2
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Placid BP v.2.1.2 dsolodov Swap Meet 1 22nd March 2014 02:21 AM
FS: Twisted Pear Placid BP Supply $45 joemana Swap Meet 0 23rd September 2011 06:34 PM
FS: Buffalo II DAC + Legato I/V + set of Placid PS + 2 Transformators Thomas Giz Swap Meet 4 29th March 2011 10:55 PM
FS: Buffalo II DAC + Placid Combo, Legato I/V Stage, 2x Placid BP Modules damohpi Swap Meet 4 23rd November 2010 08:51 AM
FS Twisted Pear Placid BP shunt regulator merlin el mago Swap Meet 8 1st April 2010 11:17 AM


New To Site? Need Help?

All times are GMT. The time now is 08:21 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2