WTB: Aleph Mini
Anyone have a done unit they want to part with??
F5 is a possible option too...thanks!!
Do you want complete amp or just boards? I have some brian gt aleph boards that i used to mske an Aleph J. Turning it into an mini AJ would just mean placing fets on the main board and dropping the output boards. Can be done easily. Let me know. Even have heatsinks and case if you want the whole shabang. Would be wise to get your own trafo to save shipping, but i could even workthat out if needbe.
I've got a full F5 set aside as you can see on the attached pics.
Matched Vgs set of FQA 12P20 and 19N20C from EUVL + Silpad.
You'll get 4 x thermistors, 2 x 2SJ74BL & 2 x 2SK170BL matched Idss JFet.
All the other parts are soldered on PCB, Zetex, note black DALE RS-10/50Ohms oversized resistors. Others are Dale RN60D + 3W Panasonic blue 47R.
Delivered with PSU board, I can source bridge rectifier too.
You'll have to purchase heatsink, transformer, PSU caps and resistors.
PM me for details
I have a fully built mini-aleph, plus I think I have the extra boards to make it a fuly fledged aleph (although I'd have to find them). It'd cost a fortune though for shipping from here to Canada!!! I'd say ~USD70-80.
There must be some boards knocking about..... or someone who would build you an F5 locally?
Buzzforb actually has one on the go for me now!!!
|All times are GMT. The time now is 10:21 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright ©1999-2016 diyAudio