Hi Guys, sorry I haven't done the discharge test yet. My car blew it's diff/gearbox just after I received the cap and I've been a bit preoccupied with sourcing parts and getting the gearbox out (it's probably going to be another three weeks at least before I have it back on the road).
I was just thinking that I can probably rig something up with my dual 45V secondary transformer to give me around 120V DC and then use some relatively high value resistors to form a voltage divider to reform the cap at 80V. My Nichicons have been sitting for a couple of years now and I should really do those before I use them so it would be useful other than just for this test. I think the leakage current test would be a good one to do as well.
Tony.
I was just thinking that I can probably rig something up with my dual 45V secondary transformer to give me around 120V DC and then use some relatively high value resistors to form a voltage divider to reform the cap at 80V. My Nichicons have been sitting for a couple of years now and I should really do those before I use them so it would be useful other than just for this test. I think the leakage current test would be a good one to do as well.
Tony.
hi pocoyo,
thats the ESR you need Jeffry for your kitchentable
Peak Electronic Design Limited - Instruments
Atlas ESR Plus (ESR70) - Capacitor Analyser
regards Walter
thats the ESR you need Jeffry for your kitchentable
Peak Electronic Design Limited - Instruments
Atlas ESR Plus (ESR70) - Capacitor Analyser
regards Walter
hiii Walter ... when you come back here ?
i will give you RENDANG the best food in the world
my kids always ask you, where is mr wortel ( aka carrot )
For 12.000 uf 63v they produce 2002 after testing
by diyaudio community they still works best with
result very good in sound reproduction
For 10.000 uf 80v i try in my amplifier too for 60.000 uf
( i try 12.000 63v, 10.000 80v & 15.000 80v )
sound stage is the same but 80v result more quit & deep bass
Your Atlas is interesting if i bought that i will check every caps
and i will charge US$ 12 and mark them as "MATCH"
i think all check by seller still get critics from the buyer
even for quality, a little bit late service, late arrival from post,
checking by custom, hole in the can ( maybe they think is cocaine )
as my opinion 80v caps better than 63v caps, deep and better layer
but as you say discount 2000uf for every caps
best regards
i will give you RENDANG the best food in the world
my kids always ask you, where is mr wortel ( aka carrot )
For 12.000 uf 63v they produce 2002 after testing
by diyaudio community they still works best with
result very good in sound reproduction
For 10.000 uf 80v i try in my amplifier too for 60.000 uf
( i try 12.000 63v, 10.000 80v & 15.000 80v )
sound stage is the same but 80v result more quit & deep bass
Your Atlas is interesting if i bought that i will check every caps
and i will charge US$ 12 and mark them as "MATCH"
i think all check by seller still get critics from the buyer
even for quality, a little bit late service, late arrival from post,
checking by custom, hole in the can ( maybe they think is cocaine )
as my opinion 80v caps better than 63v caps, deep and better layer
but as you say discount 2000uf for every caps
best regards
Last edited:
your welcome
For better mods or building PSU
you can use wbt solder on capacitor feet & cable
just solder them in a view second
best regards
hi TG ... the caps is elna for audio 10.000 uf 80v
caps : 8 x us$ 6 : us$ 48
shipping to Latvia us$ 26
total us$ 74
i will send u pm, thank you.
best regards
hi brianco
caps : 8 x us$ 6 : US$ 48
shipping to uk US$ 22
total US$ 70
i will send pm to your inbox
thank you, best regards
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.