Son of Zen parts for sale - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Closed Thread
 
Thread Tools Search this Thread
Old 22nd January 2002, 09:18 PM   #1
diyAudio Member
 
Join Date: Feb 2001
Default Son of Zen parts for sale

I gathered all these parts, but alas, have no time to finish. Here's the list:
1. Qty 2 of Superior Electric Corp Powerstat Variacs; 0-140V out @22A, 3kVA.
2. Qty 8 of Dale NH-250 8ohm 1% 250W resistors; all new, except 2 that were mounted on a test bed.
3. Qty 4 of Dale 10kohm 1% metal film 1/8W resistors; all new.
4. Qty 4 of Dale 221ohm 1% metal film 1/8W resistors; all new.
5. Qty 6 of Dale NH-50 1ohm 1% 50W resistors; all new.
6. Qty 2 of Toroid Corp custom wound power transformers, +-46V @ 22A secondaries (~2kVA); new.
7. Qty 8 of Aerovox M 30000mfd electrolytics; NOS.
8. 200lbs of heatsink, pieces cut to ~13" by ~12".
I'd like to sell this as a package, as all that's left to get are the active devices (mosfets, rectifier), inductor, and hardware, plus your electro-mechanical design.
Prefer a Southern California sale, but will ship if the price is right. There's about 300lbs of stuff here.
$800 obo plus shipping. Pls let me know if my pricing is out of line.
Thanks.
 
Old 25th January 2002, 06:18 PM   #2
diyAudio Member
 
Join Date: Feb 2001
Hey guys, any reasonable offer will be entertained! Also open to trades. I'm looking for high efficiency speakers, whether diy or commercial:
1. Raw full-range drivers (Lowther, Fostex, etc.) or
2. Front-loaded horn or rear-loaded horn fullrange speakers or
3. Vintage horns (Altec VOT, Altec Valencia, Klipshorn, JBL, etc.)
Thanks.
 
Old 16th February 2002, 02:19 AM   #3
Vuamp2 is offline Vuamp2  United States
diyAudio Member
 
Join Date: Dec 2001
Location: Texas
Add some pictures may help.
__________________
VuAmp2
http://community.webshots.com/user/vuamp2
 
Old 16th February 2002, 02:40 AM   #4
arnach is offline arnach  United States
diyAudio Member
 
Join Date: Apr 2001
Location: USA
Send a message via AIM to arnach
Default Heatsink

How much for the heatsink?

-- Aaron Finley
 
Old 16th February 2002, 04:18 AM   #5
13DoW is offline 13DoW  England
diyAudio Member
 
Join Date: Jan 2002
Location: Orange County, Ca.
Jimmy,
I'm soon to embark on a class A PA project. The heatsinks are definitely of interest to me if you'll consider selling them seperately.

Regards
13th Duke of Wymbourne
 
Old 19th February 2002, 03:44 PM   #6
diyAudio Member
 
Join Date: Feb 2001
VuAmp2, I've been meaning to take some pics, especially since the response has been low, but haven't gotten around to it.

Aaron and 13th Duke, I'm somewhat open to selling the heatsinks separately. Like I said above, haven't gotten around to taking pics, but if you want, I'll get some taken tonight. The only think, as I said in my original post, is that there's 200 lbs of heatsink here, all in chunks of ~12" by ~13". Unless you're local to me in Southern California, I would think that shipping would be quite expensive, but that's your call.

If any of you want pics, or wish to discuss this with me more, please e-mail me off-board at jysun4@hotmail.com
 
Old 19th February 2002, 08:46 PM   #7
arnach is offline arnach  United States
diyAudio Member
 
Join Date: Apr 2001
Location: USA
Send a message via AIM to arnach
Default Hmm?

Hello,

Will do, I'll contact you outside.

But hey, could you tell us where you got that heatsink stock? I'm sure others could benifit from that information.

-- Aaron
 
Old 19th February 2002, 09:30 PM   #8
diyAudio Member
 
Join Date: Feb 2001
Default Heatsinks

On my search for heatsinking for the SOZ, I found a chunk of 12" by 12" of this heavy (~12 or 13 lbs) heaksink, at the electronics store frequently used by the company I work for. I knew the owner, & asked him about it. Turns out that a metal scrap outfit had a bunch of this, & wanted to sell it to him. Anyway, I went down to this metal scrap place, & they had loads of it, extruded heatsink in long sections. Based on my design at that time, I bought 200 lb worth. Wasn't easy to haul, & wasn't cheap, at least for me.
 
Old 21st February 2002, 04:37 PM   #9
diyAudio Member
 
Join Date: Feb 2001
Default Pics

I have pictures available, please e-mail me for them. They're way too big to attach here. Also, I don't know why I was fixated on the "200lb" in the description of the heatsinks. I actually have 100lbs of heatsinks. Sorry, my bad.
 
Old 23rd February 2002, 07:04 PM   #10
A'af is offline A'af  Indonesia
diyAudio Member
 
A'af's Avatar
 
Join Date: Nov 2001
Location: Indonesia, Jakarta
Default need power

How much for all power resistor and shipping to Indonesia by FedEx, Thank you.
 

Closed Thread


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
parts for sale slickhorn Swap Meet 7 1st February 2005 07:53 AM
Son of Zen parts for sale CCOZGO40 Swap Meet 3 11th August 2002 11:55 PM
Parts for sale Ric Schultz Swap Meet 0 23rd April 2002 02:14 AM
Parts for sale logicsound Swap Meet 0 10th April 2002 02:04 PM


New To Site? Need Help?

All times are GMT. The time now is 07:21 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2