Two 12" subwoofer cabinets that I built from birch ply. They measure roughly 17" on each side, so internal volume is roughly 2 cubic feet. The cabinets are super solid, with no air leaks, but the fit-and-finish is amateur. The cabinets have feet and T-nuts installed. Price is $40 each.
For an extra $20 per cabinet, you can have dual Dayton satin nickel binding posts (suitable for a dual voice coil driver) and a Dayton black anodized aluminum binding post plate. The cabinets are already cut out for these plates, and the plates and posts are currently installed. The new price for this hardware is $60 per cabinet.
US packing and shipping is available for an extra $140 per cabinet, but I don't recommend it. At that price, you can buy a new cabinet from Dayton.
For an extra $20 per cabinet, you can have dual Dayton satin nickel binding posts (suitable for a dual voice coil driver) and a Dayton black anodized aluminum binding post plate. The cabinets are already cut out for these plates, and the plates and posts are currently installed. The new price for this hardware is $60 per cabinet.
US packing and shipping is available for an extra $140 per cabinet, but I don't recommend it. At that price, you can buy a new cabinet from Dayton.
An externally hosted image should be here but it was not working when we last tested it.
I also take payment via Dwolla -- way better than PayPal. Here's info:
What Is Dwolla? How Does It Work?
What Is Dwolla? How Does It Work?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.