FS: Lambda TD12M Woofers $295(pair)

cm7 · 6th November 2011, 06:01 PM

Lambda TD12M Woofers $295(pair) plus shipping (US only)

VERY low inductance motor with shorting rings and extended HF response.

I purchased these new. These were only used for testing but are a bit dusty. The surrounds are tacky and attract dust.

Specs

TD12M - 8ohm
Fs: 38.1Hz
Qms: 2.99
Vas: 140L
Cms: .35mm/N
Mms: 50g
Rms: 4kg/s
Xmax: 6mm
Sd: 531sqcm
Qes: .27
Re: 6.6ohm
Le: .2mH
Z: 8ohm
Bl: 17Tm
Pe: 500W
Qts: .25
1W SPL: 96.5dB

$295.00 for the pair plus shipping cost. US only.

_henry_ · 7th November 2011, 08:29 AM

hi,

what kind of packing will it be? u can ship this to us address, and they will forward it to my destination, but it has to be very well packed.

connecting both drivers with bolts is one of the best way to prevent damage to the cones.

cheers
henry

cm7 · 7th November 2011, 06:56 PM

I have one original box for sure and I think the second. If not, I have an equivalent box for a 12" driver. Those 2 boxes will be place in one larger box with bubble wrap and/or peanuts.

I can ship to someone in the US, but the shipping address on the Paypal transaction MUST match the US destination.

Best Regards,
Cedric

_henry_ · 7th November 2011, 11:28 PM

Hi Cedric,

Hmm.... The PayPal will be foreign address. The shipping destination is a forwarding company that I used regularly to Philippines.

Cheers
Henry

cm7 · 8th November 2011, 02:49 AM

Henry,

Thanks for your interest. I have a buyer for the drivers and we should complete the transaction on Wednesday. If for some reason it falls through, I will contact you to see if you are still interested.

Best Regards,
Cedric

454Casull · 8th November 2011, 02:56 AM

Good deal.

_henry_ · 8th November 2011, 03:56 AM

sure no problem.

cheers
henry

cm7 · 25th November 2011, 07:18 PM

Sold. Thanks to all for asking.

8th November 2011, 02:56 AM	#6
454Casull diyAudio Member Join Date: Jan 2004 Location: Toronto, ON, Canada	Good deal. __________________ Building a 2.1 system out of a 3/4"x4'x8' sheet

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AE Lambda TD12M - vented box simulation	IG81	Multi-Way	0	5th May 2011 04:33 PM
FS Acoustic Elegance Lambda TD12H 8 ohm pair of woofers	speakerdealz	Swap Meet	0	16th March 2011 04:48 PM
JBL 2206H vs. Lambda TD12M	Defo	Multi-Way	10	27th March 2009 11:34 PM
quantity of 4 parts express #295-330 woofers FS	noisenyc	Swap Meet	4	9th June 2006 12:00 AM
FS: pair of new Lambda TD-15S sealed box woofers	taloyd	Swap Meet	2	5th June 2006 02:45 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th November 2011, 08:29 AM	#2
_henry_ diyAudio Member Join Date: Jun 2002 Location: Indonesia	hi, what kind of packing will it be? u can ship this to us address, and they will forward it to my destination, but it has to be very well packed. connecting both drivers with bolts is one of the best way to prevent damage to the cones. cheers henry

7th November 2011, 06:56 PM	#3
cm7 diyAudio Member Join Date: Jul 2003 Location: Texas	I have one original box for sure and I think the second. If not, I have an equivalent box for a 12" driver. Those 2 boxes will be place in one larger box with bubble wrap and/or peanuts. I can ship to someone in the US, but the shipping address on the Paypal transaction MUST match the US destination. Best Regards, Cedric

7th November 2011, 11:28 PM	#4
_henry_ diyAudio Member Join Date: Jun 2002 Location: Indonesia	Hi Cedric, Hmm.... The PayPal will be foreign address. The shipping destination is a forwarding company that I used regularly to Philippines. Cheers Henry

8th November 2011, 02:49 AM	#5
cm7 diyAudio Member Join Date: Jul 2003 Location: Texas	Henry, Thanks for your interest. I have a buyer for the drivers and we should complete the transaction on Wednesday. If for some reason it falls through, I will contact you to see if you are still interested. Best Regards, Cedric

8th November 2011, 03:56 AM	#7
_henry_ diyAudio Member Join Date: Jun 2002 Location: Indonesia	sure no problem. cheers henry

25th November 2011, 07:18 PM	#8
cm7 diyAudio Member Join Date: Jul 2003 Location: Texas	Sold. Thanks to all for asking.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)