Arlon 25N pcb material

[John Chapman]

Hello!

I am juggling shops and looking to find a new home for lots of stuff - including this Arlon 25N pcb material. Bought in 2007 and stored safely in it's original box in my office here. Very hard to get in smaller qty's and teflon like in it's properties but MUCH easier (and therefore less expensive) for pcb makers to work with than teflon. There are 6 sheets are 18" x 24" and 6 sheets of 9x24. The 9x24 sheets were cut at the board shop I used and a couple of them have small scratches on them. I am not setup to cut the sheets here. My local board shop could process this fine as long as I provided the material. Can snap a photo of it if interested. Prefer to sell it all in one lot shipped in the original box.

e-mail johnc@bentaudio.com if interested.

Thansk!

John

[John Chapman]

Hello!

Update. 3 of the small sheets gone. Awaiting reply from a fellow on the rest of the material so a sale is pending but I will update status within 2 days.

Thansk!

John