FS 6 Channel LM3886 (ELAN)Gain clone - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 24th September 2011, 08:31 PM   #1
diyAudio Member
Join Date: Sep 2005
Default FS 6 Channel LM3886 (ELAN)Gain clone


For sale a couple month old Elan 6 channel gain clone amplifier
These rated 6X60W or it possible to usein bridge mode 3X120W.

Some specification

Frequency Response 20Hz to 20kHz -.25dB
Full Power Bandwidth 10Hz to 30kHz
Signal to Noise >110dB (A-weighted)
Channel Separation >70dB @ 1kHz
THD < 0.03%
Intermodulation Distortion < -90dB
Voltage Gain (Av) 0 to 28, adjustable
Input Impedance 20k Ohms
Remote Trigger Input 5-24V AC/DC
Trigger Loop Output +12VDC @ 0.1A
AC Power Requirements 120VAC, 440W
Current Draw 3.7A @ 120VAC
Z•660 Dimensions (in.) 17 W x 2-1/4 H x 11 D, (mm) 432 W x 58 H x 280 D
Z•660 Dimensions (in.) 19 W x 1-3/4 H x 11 D, (mm) 483 W x 45 H x 280 D

About the price in the store
Neptune Sales - Elan Z660 6 Channel Power Amplifier
I ask for these less than half the store price $250. The amplifier not even brocken in.
I prefer pick up but I can ship to USA & Canada but it is very heavy, the buyer pay for shipping and half of the pay pal fee..
The sound very natural, warm, ube like. Works perffect, I just don't have a need for. I only open up to take a picture!
These who like soround system etc. Also can be use as a Stereo amp but you need to ad a volume control.
I used to drive with my CD player has output volume control.
I'm also interested on trade
good quality turntable tone arm or a pair new Usher 8945P and $100
You can see these drivers here for sale
FS: Usher Audio 8945P Drivers NIB
Thanks for the interest.
Greetings gabor
Attached Images
File Type: jpg IMG_0003.JPG (116.8 KB, 632 views)
File Type: jpg IMG_0004.JPG (98.5 KB, 608 views)
File Type: jpg IMG_0002_2.JPG (40.9 KB, 599 views)
File Type: jpg IMG_0001_2.JPG (36.8 KB, 591 views)
  Reply With Quote
Old 25th September 2011, 04:27 AM   #2
jdubs is offline jdubs  United States
diyAudio Member
Join Date: Jul 2004
Location: NYC
I'll take it. PM'd.

  Reply With Quote
Old 25th September 2011, 01:34 PM   #3
diyAudio Member
Join Date: Sep 2005
Sale is pending...
  Reply With Quote
Old 27th September 2011, 11:27 AM   #4
diyAudio Member
Join Date: Sep 2005

The amplifier back for sale again.Unfortunately the deal didn't come together..

  Reply With Quote
Old 27th September 2011, 03:08 PM   #5
diyAudio Member
Join Date: Jan 2007
PM sent...
  Reply With Quote
Old 28th September 2011, 01:28 AM   #6
diyAudio Member
Join Date: Sep 2005
Lowballers please "just give me a break!!!"
I think is a fair price less than half price, no tax in case pick up no shipping cost, I can ship as a gift etc.
I ship her where ever you ask in case you pay the shipping cost.
I do not charge extra for shipping or packaging only out of 4% pay pal fee please pay 2%.
Thank you
Greetings Gabor
  Reply With Quote
Old 28th September 2011, 04:09 PM   #7
diyAudio Member
Join Date: Sep 2005

I'll wait 2-3 days more after it goes to local "kijiji or craigslist" for sale. In case someone wait the price be lowered that will not happen.
These is a new amp, it sell for $600 bucks plus tax plus shipping so on.
If these do not worth $250 I'd rather keep it.
It sound better than the P Daniel kit what I purchased for $100. I needed to ad transformer, enclosure so on (on the end cost $250) and still was a Stereo amp. I do not want to write more about that since someone business...And He also was more than fair to me when ever I bought something from him!
You can use these amp three amping 3x120W.. Or a home theater amp as 6X60W channel amp.
I com-pare some of my stuff and really sound great. I just want to build or listening tube stuff now on..
I need the fund to buy the parts for my GM70 tube amp.
You can see in another ad I sell Solen inductors..
I want to finish that tube project (still need the irons).
Greetings gabor
  Reply With Quote
Old 29th September 2011, 04:25 AM   #8
diyAudio Member
Join Date: Sep 2005
Default Open for trade to!


I'm also open for trade. Trade value a bit higher always like cash, think about 320-350US Dollar..
I have a need for a pair good quality 10K SE OP transformer for GM70 tube amp same as 845..
These must be 30W or so, it must be able to handle continuous 1.5KV plate voltage, must be right air gapped for these tube. Like FIAT or so. If it cost more I pay the difference
Also I need a pair 2.5K or 3.2K SE OP transformer for GU50 parallel. Have to be 25W or so something better than Edcor or if you have Edcor plus some cash I'll think about
No home brew transformers please, neither China made junk..
Also interested on high-end tonearm like SME, Jelco, Micro Seki - what you have.
Only answer for fair offers.
I taught why not try trade, I want to buy the transformer anyway.. Tonearm deal only if is good offer- good deal.
Again I remind you the amp like new, the new cost $600US plus tax , shipping or custom duty..
Work and sound excellent

Greetings gabor
  Reply With Quote
Old 29th September 2011, 10:54 PM   #9
diyAudio Member
Join Date: Sep 2005

Any reasonable offers trade or fund?? I only can take pay pal or cash at pick up..I write these because I got a offer with Canada postal money order.
Hard to believe nobody need a amp like these. It has a multiple function less than half price..
Bridgeable, you can use as a home theater amp, drive each driver with a separate amp.

Greetings gabor

Last edited by gaborbela; 29th September 2011 at 11:01 PM.
  Reply With Quote
Old 30th September 2011, 03:14 PM   #10
jtktam is offline jtktam  Canada
diyAudio Member
Join Date: Apr 2009
Location: Toronto, Ontario, Canada
Blog Entries: 17
where you located?

  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
2*100 watt @ 4ohm TK2050 or LM3886 Gain Clone?? fr1s Class D 3 19th April 2012 11:01 PM
2*100 watt @ 4ohm TK2050 or LM3886 Gain Clone?? fr1s Chip Amps 71 11th August 2011 11:57 AM
First Audio Circuit (Gain Clone w/LM3886) milsman2 Chip Amps 10 10th August 2011 05:48 PM
FS: LM3886 Gain Clone Chips (19) bolserst Swap Meet 5 26th October 2008 06:35 PM
LM3886 gain clone vs STK4048XI for 4 ohm load filgor Chip Amps 0 25th September 2004 12:05 PM

New To Site? Need Help?

All times are GMT. The time now is 10:54 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2