FS: Built Hypnotize DCB1's

boudy · 02:05 AM

Each is for sale separately and is described in the posts that follow.

I built these up about a year (?) ago. As usual, plans change. They have seen limited use.

Each board includes the transformer shown in the corresponding picture.

They are somewhat rodded but I don't remember the specifics of the build. I know I adjusted the currents and voltages as recommended on the threads here and on AudioCircle but didn't record where I ended up. They don't get excessively hot.

"Audio quality" resistors in the signal path (don't remember the brand).

They work fine and sound good.

US buyers only at this time.

$125 for each board/transformer combination, including PayPal fees and shipping within continental US.

The stand-offs are not included.

boudy · 02:04 AM

Transistors and capacitors mounted to minimize the height. The plan was to use the chassis bottom as the heat sink.

The delay relay section was not implemented.

boudy · 14th September 2011, 01:58 AM

The delay relay section is implemented on this board.

DaveM · 14th September 2011, 02:12 AM

Those are Takman resistors in the signal path.

jtktam · 15th September 2011, 01:49 PM

can i take the second with the first's tranformer :-)

-joe

boudy · 26th September 2011, 03:10 AM

$110 for each board/transformer combination, including PayPal fees and shipping within continental US.

boudy · 27th October 2011, 10:54 PM

The "Tall" Hypnotize DCB1 is sold!

14th September 2011, 01:54 AM	#1
boudy diyAudio Member Join Date: Sep 2006	FS: Built Hypnotize DCB1's Each is for sale separately and is described in the posts that follow. I built these up about a year (?) ago. As usual, plans change. They have seen limited use. Each board includes the transformer shown in the corresponding picture. They are somewhat rodded but I don't remember the specifics of the build. I know I adjusted the currents and voltages as recommended on the threads here and on AudioCircle but didn't record where I ended up. They don't get excessively hot. "Audio quality" resistors in the signal path (don't remember the brand). They work fine and sound good. US buyers only at this time. $125 for each board/transformer combination, including PayPal fees and shipping within continental US. The stand-offs are not included. Last edited by boudy; 14th September 2011 at 02:05 AM. Reason: added information

26th September 2011, 03:10 AM	#6
boudy diyAudio Member Join Date: Sep 2006	Price reduction $110 for each board/transformer combination, including PayPal fees and shipping within continental US.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using the HYPNOTIZE as a general shunt reg PCB	Salas	Power Supplies	541	19th February 2012 12:17 AM
New Pair of DCB1 hypnotize boards sale.	bigaudioscotto	Swap Meet	2	25th April 2011 08:04 PM
FS : F3 PCB + PSU - Hypnotize - Mezmerize - LightSpeed	korben69	Swap Meet	13	17th May 2010 12:56 PM
FS: 4 x LM4780 4ch Amp Built	alexcd	Swap Meet	7	19th November 2008 08:30 PM
FS: Pair of Aleph30 Boards built up	wirewiggler	Swap Meet	7	22nd November 2007 08:30 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th September 2011, 02:12 AM	#4
DaveM diyAudio Member Join Date: Feb 2003 Location: Vermont	Those are Takman resistors in the signal path.

15th September 2011, 01:49 PM	#5
jtktam diyAudio Member Join Date: Apr 2009 Location: Toronto, Ontario, Canada Blog Entries: 17	can i take the second with the first's tranformer :-) -joe

27th October 2011, 10:54 PM	#7
boudy diyAudio Member Join Date: Sep 2006	The "Tall" Hypnotize DCB1 is sold!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)