The loudest and best sounding 21" sub for under $400!! - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 8th September 2011, 06:20 AM   #1
diyAudio Member
 
Join Date: Feb 2009
Default The loudest and best sounding 21" sub for under $400!!

Today have for sale is a P.Audio SD-21 el 21" subwoofer. This sub is basically like 2-15" subwoofers put together. The voice coil is 6" in diameter and is 2" tall. Its 40% bigger than a 18" subwoofer. I bought this thing for a dj service. Just to big for what I needed. Its in new condition, its been screwed into a enclosure, but is in very good condition.

This is a monster JUST CHECK OUT THE PICTURES!!

There is a 8" coxail speaker beside it to give you an idea of the size of this sub. This is a hell of a bumping machine for the money!!!

This would be great for a big home theater system, club, bar, etc!!

This subwoofer is no JOKE!! It weighs 77 pounds.

SPECIFICATIONS
Nominal Diameter 533 mm, 21 Inch
Rated Impedance 8Ω
Operating Bandwidth 20 Hz- 300 Hz
Power Handling Capacity 1200 W rms R.M.S.
Sensitivity 2.83 V, 1M 96 dB
Effective Piston Diameter 460 mm, 18.1 Inch
Voice Coil Diameter 152.40 mm, 6 Inch

Thiele - Small Parameters
Resonance Frequency Fs 32.8 Hz
DC Resistance Re 5.8Ω
Mechanical Q Factor Qms 9.526
Electrical Q Factor Qes 0.378
Total Q Factor Qts 0.364
BL Factor BL 31.55 T x m
Effective Moving Mass Mms 315.02 gr
Equivalent Cas air load Vas 292.92 liters
Effettive piston area Sd 0.1662 m2
Voice - coil inductance @ 1KHz Le1K 0.81 mH
Half-space efficiency Eff 2.64 %
Airgap Height Hag 15.0 mm
Voice coil Height Hvc 30.0 mm
Voice Coil Over-Hung Xmax 7.5 mm

Physical Information
Basket Die Cast Aluminium
Magnet type,size ODxIDxH (mm.) 300 X 170 X 18 Ferrite X 2 | 152.3 oz
Voice coil Former Glass Fiber Bobbin | High Temp 200-250 oc
Voice coil Material Aluminum Flat Wire / In- Out | High Temp 185-230 oc
Cone Material Pulp Paper
Surround Cloth
Unit Weight /piece 35.0 Kgs., 77.0 lbs



Paid $850 for it. Asking $375 plus shipping and a 3% pay pal fee. There are alot of subs out there for $375, but they dont come anywhere to this Big Fella.

I accept paypal

email address and pay pal address
bartoetken@gmail.com
Attached Images
File Type: jpg SDC11531.JPG (838.2 KB, 151 views)
File Type: jpg SDC11535.JPG (843.8 KB, 139 views)
File Type: jpg SDC11536.JPG (845.8 KB, 132 views)

Last edited by Bart Oetken; 8th September 2011 at 06:31 AM.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
4 21" for HT ..what u think ? JinMTVT Subwoofers 60 17th June 2012 04:55 PM
Need a good recommendation on a "great" sounding 7.2 surround amp Thaedge Solid State 0 10th March 2011 03:49 PM
TonyGee has his 21" sub page up! ScottG Subwoofers 3 29th May 2008 01:55 PM
21"new design cyclone-audio Subwoofers 1 2nd June 2006 12:25 PM


New To Site? Need Help?

All times are GMT. The time now is 12:07 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2