FS: DCB-1 Mezmerize complete with all components

Frosteh · 11:30 PM

I have a DCB-1 Mezmerize preamp for sale. It is completely soldered except for the volume pot. Included is the board, selector switch, all molex connectors and crimps, power LED, and the transformer. I can throw in some wire for the input selector as well. All this board needs is to be installed into an enclosure. The board has never been used so hook it up and you're good to go!

This board has been slightly hot rodded by using 8.2R resistors instead of the ones in the BOM. As such, I have resoldered the IRFP240's to the underside so that the enclosure can be used as a heatsink (I originally bought the board from thadman, who had soldered them vertically. Merely personal preference to resolver this way). All soldering on the board was done by thadman except for the 8.2R resistors and the IRFP240's. He did a phenomenal job.

Not pictured: LED's, molex crimp connectors

Frosteh · 18th August 2011, 07:38 PM

This board is still available. I'd like to get ~$160 for this board and all the accessory components.

Frosteh · 19th August 2011, 12:18 AM

One slight edit: I misspoke earlier. particleman14 was the original owner and solderer of this board, not thadman. I apologize if this caused any confusion.

Frosteh · 21st August 2011, 07:54 AM

Bump, anyone?

Frosteh · 22nd August 2011, 04:51 PM

Price drop. Asking $150 OBO + shipping.

Frosteh · 23rd August 2011, 02:36 AM

New price. $150 incl. shipping.

shoom · 23rd August 2011, 02:48 PM

Hi Frosteh

you have PM

take care

16th August 2011, 11:27 PM	#1
Frosteh diyAudio Member Join Date: May 2011 Location: Kirkland, WA	FS: DCB-1 Mezmerize complete with all components I have a DCB-1 Mezmerize preamp for sale. It is completely soldered except for the volume pot. Included is the board, selector switch, all molex connectors and crimps, power LED, and the transformer. I can throw in some wire for the input selector as well. All this board needs is to be installed into an enclosure. The board has never been used so hook it up and you're good to go! This board has been slightly hot rodded by using 8.2R resistors instead of the ones in the BOM. As such, I have resoldered the IRFP240's to the underside so that the enclosure can be used as a heatsink (I originally bought the board from thadman, who had soldered them vertically. Merely personal preference to resolver this way). All soldering on the board was done by thadman except for the 8.2R resistors and the IRFP240's. He did a phenomenal job. Not pictured: LED's, molex crimp connectors Last edited by Frosteh; 16th August 2011 at 11:30 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mez DCB-1 and MiniDSP in same box?	Frosteh	Pass Labs	0	31st July 2011 06:28 AM
WTB: DCB-1 Mezmerize PCB	Frosteh	Swap Meet	2	26th July 2011 09:45 AM
FS: TERES 145 complete	user510	Swap Meet	1	11th July 2010 10:29 PM
FS : F3 PCB + PSU - Hypnotize - Mezmerize - LightSpeed	korben69	Swap Meet	13	17th May 2010 12:56 PM
FS:Complete TA2020	mravlca	Swap Meet	0	2nd November 2009 08:27 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th August 2011, 07:38 PM	#2
Frosteh diyAudio Member Join Date: May 2011 Location: Kirkland, WA	This board is still available. I'd like to get ~$160 for this board and all the accessory components.

19th August 2011, 12:18 AM	#3
Frosteh diyAudio Member Join Date: May 2011 Location: Kirkland, WA	One slight edit: I misspoke earlier. particleman14 was the original owner and solderer of this board, not thadman. I apologize if this caused any confusion.

21st August 2011, 07:54 AM	#4
Frosteh diyAudio Member Join Date: May 2011 Location: Kirkland, WA	Bump, anyone?

22nd August 2011, 04:51 PM	#5
Frosteh diyAudio Member Join Date: May 2011 Location: Kirkland, WA	Price drop. Asking $150 OBO + shipping.

23rd August 2011, 02:36 AM	#6
Frosteh diyAudio Member Join Date: May 2011 Location: Kirkland, WA	New price. $150 incl. shipping.

23rd August 2011, 02:48 PM	#7
shoom diyAudio Member Join Date: Jul 2010 Location: Worcestershire	Hi Frosteh you have PM take care