TP Buffalo 2 package (Buf2, Ivy, placid, lcdps)

dwk123 · 14th August 2011, 01:15 AM

Having gotten my DSP xover PC based system working, the Buf2 just doesn't fit well and so it has to move on.

The full package is the buffalo 2, an original ivy (which is still set up for the opus, but still sounds good), volumite (volumite firmware installed, but I have the original firmware), plus an unassembled pair of PS boards - a placid and an LCDPS. I ran these in prototype mode using an off-the-shelf unit that provided 5V and +-12V and never got around to assembling the PS boards. I also have a toslink receiver that I'll throw in.

Asking $225 for the full package listed above. I'm not interested in splitting up at this point - I'll consider it if for some reason there isn't anyone interested in the full kit. I'll include USPS flat rate shipping (domestic only) at that price.

back · 14th August 2011, 05:52 AM

i am interested.
will you give me shipping cost for greece gr 71305 with usps?

dwk123 · 14th August 2011, 06:27 AM

There are several replies stacked up on this, so it's probably a good bet that it's spoken for.

back · 14th August 2011, 07:28 AM

Quote:

Originally Posted by dwk123

There are several replies stacked up on this, so it's probably a good bet that it's spoken for.

??

ljfont · 14th August 2011, 07:53 AM

If not I would like to buy it. Thanks.

I live in Canada.

dwk123 · 16th August 2011, 04:00 AM

Just confirming that this is sold.

back · 16th August 2011, 06:56 AM

i was wondering why i didn`t get them since i replied first.

usp1 · 16th August 2011, 05:19 PM

Quote:

Originally Posted by back

i was wondering why i didn`t get them since i replied first.

back,

Many of us sent replies without writing on the thread. I think I was second in line and I sent a message within minutes after this was posted. But someone else beat me to it. Don't take it personally.

dwk123 · 16th August 2011, 06:16 PM

Yes, it's tricky to balance things when replies can come in via the thread, or via PM, or via email sent through the forum. The first reply on this came in almost immediately via PM.

back · 16th August 2011, 09:05 PM

i don`t take it personaly and of course i believe the seller.
i am just saying it would be better anyone interested should answer
the thread first so the seller don`t have to prove who is first because
anybody can see it.
at least that`s how it`s done at a couple of forums i am member at.

14th August 2011, 07:53 AM	#5
ljfont diyAudio Member Join Date: Feb 2008 Location: Vancouver, British Columbia	hi is it sold? If not I would like to buy it. Thanks. I live in Canada.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: TP IVY III	joemana	Swap Meet	2	6th July 2011 06:40 PM
Trade Twisted Pair Placid for LCDPS	compressit	Swap Meet	0	20th December 2010 01:47 AM
FS:TP IVY 3 and S/PDIF transceiver	RichLund	Swap Meet	2	11th December 2010 01:32 AM
FS: Buffalo II DAC + Placid Combo, Legato I/V Stage, 2x Placid BP Modules	damohpi	Swap Meet	4	23rd November 2010 08:51 AM
Twisted Pear Buffalo/IVY/LCBPS/LCDPS	Hacker	Swap Meet	6	26th February 2009 04:57 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th August 2011, 05:52 AM	#2
back diyAudio Member Join Date: Nov 2005 Location: crete	i am interested. will you give me shipping cost for greece gr 71305 with usps?

14th August 2011, 06:27 AM	#3
dwk123 diyAudio Member Join Date: Feb 2002	There are several replies stacked up on this, so it's probably a good bet that it's spoken for.

16th August 2011, 04:00 AM	#6
dwk123 diyAudio Member Join Date: Feb 2002	Just confirming that this is sold.

16th August 2011, 06:56 AM	#7
back diyAudio Member Join Date: Nov 2005 Location: crete	i was wondering why i didn`t get them since i replied first.

16th August 2011, 06:16 PM	#9
dwk123 diyAudio Member Join Date: Feb 2002	Yes, it's tricky to balance things when replies can come in via the thread, or via PM, or via email sent through the forum. The first reply on this came in almost immediately via PM.

16th August 2011, 09:05 PM	#10
back diyAudio Member Join Date: Nov 2005 Location: crete	i don`t take it personaly and of course i believe the seller. i am just saying it would be better anyone interested should answer the thread first so the seller don`t have to prove who is first because anybody can see it. at least that`s how it`s done at a couple of forums i am member at.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)