Single Ended Tube Amp For Sale

[scott17]

Single-Ended Tube Amplifier For Sale

If you are interested please send a PM. If you are in the NYC area you are welcome to audition the amp in person.

• Triode or Ultra-Linear Operation - Switchable
• Supplied with Electro-Harmonix KT88 Output Tubes, NOS Russian 6N1P-EV Driver, & Electro-Harmonix 5U4GB Rectifier
• Output Tube Compatibilty: KT88, 6550, EL34, 6CA7 - no changes required
• Custom Transformers & Power Supply Choke - Made in USA
• Independent LC Plate Supply Filters for Each Channel of Driver Tube
• No Feedback
• No Semiconductors
• Hand-Wired, Fully Tested
• All Vishay-Dale Metal Film Resistors except Dale Wirewound for Output Tube Cathode Resistor & Chassis Ground Filter
• Metallized Polypropylene/Oil Power Supply Capacitors
• Elna Silmic II Output & Driver Tube Cathode Bypass Capacitors
• Erse Pulse X Metallized Polypropylene Coupling Capacitors
• Alps Blue Velvet Input Attenuator - 100K
• Pomona 5-Way Speaker Binding Posts
• High-Quality Belton Micalex Tube Sockets
• IEC EMI/RFI Filtered Power Entry Module w/Integral Fuse Holder
• Powder-Coated Chassis and Transformer Covers - Color: RAL9006

Specifications:
Output Power:
5 +/- Watt/Channel RMS Triode Mode (6 Ohm Load with KT88)
10 +/- Watt/Channel RMS Ultra-Linear Mode (6 Ohm Load with KT88)
Input Sensitivity: 1V RMS
Frequency Response: 30Hz ~ 20,000Hz -1dB, 20Hz ~ 22,000Hz -3dB
Hum & Noise: 1 mV RMS
Output Transformer: 5000 Ohm Primary, 6 Ohm Secondary
Recommended Speakers: 4 ~ 8 Ohms, > 89dB 1W/1m
Dimensions: 18"W X 11.5"D X 8.5"H
Weight: 32.5 lbs.

Price: $1,149.00
Estimated shipping cost: to Los Angeles $100, to Chicago $70.00

[6L6PPP]

Absolutely beautiful .... my compliments.

[jmillerdoc]

Just sold mine!

[6L6PPP]

Originally Posted by jmillerdoc

Just sold mine!

to me ....

[scott17]

This amp is now available for purchase on request at the price listed and as shown in the photos. Most RAL colors are available for the chassis and transformer covers for an additional charge.

Thanks,

Scott

Originally Posted by scitizen17

Single-Ended Tube Amplifier For Sale

If you are interested please send a PM. If you are in the NYC area you are welcome to audition the amp in person.

• Triode or Ultra-Linear Operation - Switchable
• Supplied with Electro-Harmonix KT88 Output Tubes, NOS Russian 6N1P-EV Driver, & Electro-Harmonix 5U4GB Rectifier
• Output Tube Compatibilty: KT88, 6550, EL34, 6CA7 - no changes required
• Custom Transformers & Power Supply Choke - Made in USA
• Independent LC Plate Supply Filters for Each Channel of Driver Tube
• No Feedback
• No Semiconductors
• Hand-Wired, Fully Tested
• All Vishay-Dale Metal Film Resistors except Dale Wirewound for Output Tube Cathode Resistor & Chassis Ground Filter
• Metallized Polypropylene/Oil Power Supply Capacitors
• Elna Silmic II Output & Driver Tube Cathode Bypass Capacitors
• Erse Pulse X Metallized Polypropylene Coupling Capacitors
• Alps Blue Velvet Input Attenuator - 100K
• Pomona 5-Way Speaker Binding Posts
• High-Quality Belton Micalex Tube Sockets
• IEC EMI/RFI Filtered Power Entry Module w/Integral Fuse Holder
• Powder-Coated Chassis and Transformer Covers - Color: RAL9006

Specifications:
Output Power:
5 +/- Watt/Channel RMS Triode Mode (6 Ohm Load with KT88)
10 +/- Watt/Channel RMS Ultra-Linear Mode (6 Ohm Load with KT88)
Input Sensitivity: 1V RMS
Frequency Response: 30Hz ~ 20,000Hz -1dB, 20Hz ~ 22,000Hz -3dB
Hum & Noise: 1 mV RMS
Output Transformer: 5000 Ohm Primary, 6 Ohm Secondary
Recommended Speakers: 4 ~ 8 Ohms, > 89dB 1W/1m
Dimensions: 18"W X 11.5"D X 8.5"H
Weight: 32.5 lbs.

Price: $1,149.00
Estimated shipping cost: to Los Angeles $100, to Chicago $70.00