• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Dayton MTM speakers, Baffles, drivers, xovers ports...

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
A

apoopoo999

Member
Joined 2010
This is a set of dayton MTMs minus the cabinets.
What is included is:
4 Dayton DA135-8 5 1/4" aluminum woofers
2 Dayton DC28F-8 1 1/8" silk tweeters
2 Pre-cut MB75MTM baffles
2 third order butterworth xovers
2 2" ports
2 black cloth grills

These will need .76 cu ft cabinets
Box Dimensions are 8"x20"x13" (including front baffle) using 3/4" walls
this is a ported box tuned to 45hz

The baffles has some chipping of the paint around the area where the grill fasteners are inserted. Can be repaired with wood filler and black paint. Will not be visible when grills are in place.

Asking $100 for everything.


An externally hosted image should be here but it was not working when we last tested it.


Uploaded with ImageShack.us

An externally hosted image should be here but it was not working when we last tested it.


Uploaded with ImageShack.us

An externally hosted image should be here but it was not working when we last tested it.


Uploaded with ImageShack.us

An externally hosted image should be here but it was not working when we last tested it.


Uploaded with ImageShack.us

An externally hosted image should be here but it was not working when we last tested it.


Uploaded with ImageShack.us

An externally hosted image should be here but it was not working when we last tested it.


Uploaded with ImageShack.us
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom