Feeler: Eros complete kit, ready to build

[jmillerdoc]

I have all of the parts ready to build the Eros here:

http://www.speakerbuilder.net/web_fi...oject/eros.htm

I recently built a pair of MTMs using the SS2905/9700 and 18W8545k with assistance from GR Research on the XO design....these turned out so good I have decided I probably won't build the Eros.

Included.....

X4 Vifa PL18 7" (original Vifa production, now out of production)
X2 Scanspeak 2905/9500
X2 series XOs built with all foil inductors and high quality film caps and Mills
X2 Precision Ports
X2 Electrotube binding post sets
12ga OFCC poylethelene solid core wire for internal wiring

If you don't want series XOs, all of the critical components needed for the parallel XO's are on the series boards sans a couple of resistors I believe....these could be rebuilt as parallel if desired with little to no extra expense.

Retail on these parts were well over $900 when purchased new. Most components are either new or tested only condition.

Will consider reasonable offers on the whole lot....will not separate at this time.
Have a new baby on the way and need to pair down my stock of stuff.
Cheers!

[jmillerdoc]

Bump for the weekend....