FS: Aluminum Enclosures Par-Metal Enclosures

PHilgeman · 24th May 2011, 12:59 PM

These are all enclosures from Par-Metal. They were all once amplifier or preamp cases and include everything that is pictured, they are the 20 series cases. Most of these cost 70-90 new. I am selling them for the prices indicated below, plus shipping, they may be missing some of the screws to hold the covers on, but they would be about $2.00 at home depot. I'd guess shipping will be in the $10-20 range. You will notice below that they are numbered, please include the numbers in the payments/correspondence.

For fastest response, paypal or e-mail to pkhilgeman@gmail.com.

NUMBER 1 - $40.00 - 16" wide, 12" deep, 4" tall, custom front panel with 22mm hole, bamboo feet, standard amplifier stuff on the rear, includes IEC inlet, binding posts, looks like 1 switch.

NUMBER 2 - $30.00 - 16" Wide, 12" deep, 4" tall, At one point, this was a 6 ch. volume control with 4 amplified channels on-board. Some of the circuitry is still inside, some is not. It includes 4 sets of binding posts and some of the balanced inputs. The front panel has two roughly 5/8" holes.

NUMBER 3 - $50.00 - 16" Wide, 16" Deep, 5" Tall large amplifier case Includes all connectors for 2 channels, and looks like it has holes for 4 channels. Includes IEC inlet. Front panel is clean.

NUMBER 4 - $40.00 - 16" Wide, 16" Deep, 4" Tall Large amplifier case, includes connectors for 2 ch. and IEC inlet. One hole on front panel, maybe 5/8". Pictures might be confusing, it is simply on-top of the above amplifier.

Last, I still have these tweeters for sale, $20.00 Each, 3 available, one is missing a lead, but there is plenty left on the lead-out wire to re-solder, that one is $10.00:

You can find more info at madisound:
https://www.madisound.com/store/prod...oducts_id=8489

Thanks for looking!

brik · 24th May 2011, 02:22 PM

You have PM.

DreadPirate · 06:06 PM

I'll take #1 if not already spoken for. Otherwise, #4.

john65b · 25th May 2011, 03:21 AM

Email sent (and I am local)

jmillerdoc · 25th May 2011, 10:12 AM

I will take one....#4 preferably. I will send an email with my info to calculate shipping and total cost.
Jeff

PHilgeman · 25th May 2011, 12:06 PM

All have been spoken for, awaiting payment on 2, 3 and 4, I will re-post when payments for all have been received.

wendell c · 28th May 2011, 07:42 PM

I am interested if any falls through

24th May 2011, 05:58 PM	#3
DreadPirate diyAudio Member Join Date: Jan 2006 Location: Northern Virginia, USA	I'll take #1 if not already spoken for. Otherwise, #4. Last edited by DreadPirate; 24th May 2011 at 06:06 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: small aluminum enclosures	madisonears	Swap Meet	5	25th March 2009 12:28 AM
Need a some custom aluminum enclosures made	triden	Everything Else	5	27th November 2007 01:29 PM
FS: Hammond Enclosures	davidhs	Swap Meet	2	18th April 2007 03:52 PM
FS: Amp enclosures	jrsun	Swap Meet	8	22nd January 2004 06:34 PM
help i need metal enclosures	badger	Parts	3	27th February 2002 05:37 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th May 2011, 12:59 PM	#1
PHilgeman diyAudio Member Join Date: Dec 2003 Location: Arlington Heights, IL	FS: Aluminum Enclosures Par-Metal Enclosures These are all enclosures from Par-Metal. They were all once amplifier or preamp cases and include everything that is pictured, they are the 20 series cases. Most of these cost 70-90 new. I am selling them for the prices indicated below, plus shipping, they may be missing some of the screws to hold the covers on, but they would be about $2.00 at home depot. I'd guess shipping will be in the $10-20 range. You will notice below that they are numbered, please include the numbers in the payments/correspondence. For fastest response, paypal or e-mail to pkhilgeman@gmail.com. NUMBER 1 - $40.00 - 16" wide, 12" deep, 4" tall, custom front panel with 22mm hole, bamboo feet, standard amplifier stuff on the rear, includes IEC inlet, binding posts, looks like 1 switch. NUMBER 2 - $30.00 - 16" Wide, 12" deep, 4" tall, At one point, this was a 6 ch. volume control with 4 amplified channels on-board. Some of the circuitry is still inside, some is not. It includes 4 sets of binding posts and some of the balanced inputs. The front panel has two roughly 5/8" holes. NUMBER 3 - $50.00 - 16" Wide, 16" Deep, 5" Tall large amplifier case Includes all connectors for 2 channels, and looks like it has holes for 4 channels. Includes IEC inlet. Front panel is clean. NUMBER 4 - $40.00 - 16" Wide, 16" Deep, 4" Tall Large amplifier case, includes connectors for 2 ch. and IEC inlet. One hole on front panel, maybe 5/8". Pictures might be confusing, it is simply on-top of the above amplifier. Last, I still have these tweeters for sale, $20.00 Each, 3 available, one is missing a lead, but there is plenty left on the lead-out wire to re-solder, that one is $10.00: You can find more info at madisound: https://www.madisound.com/store/prod...oducts_id=8489 Thanks for looking!

24th May 2011, 02:22 PM	#2
brik diyAudio Member Join Date: Oct 2004	You have PM.

25th May 2011, 03:21 AM	#4
john65b diyAudio Member Join Date: Jan 2005 Location: Chicago	Email sent (and I am local) __________________ "I speak Spanish to God, Italian to Women, French to Men, and German to my Horse" - Charles V

25th May 2011, 10:12 AM	#5
jmillerdoc diyAudio Member Join Date: Mar 2009 Location: Lawton, OK, USA	I will take one....#4 preferably. I will send an email with my info to calculate shipping and total cost. Jeff

25th May 2011, 12:06 PM	#6
PHilgeman diyAudio Member Join Date: Dec 2003 Location: Arlington Heights, IL	All have been spoken for, awaiting payment on 2, 3 and 4, I will re-post when payments for all have been received.

28th May 2011, 07:42 PM	#7
wendell c diyAudio Member Join Date: Jan 2006 Location: Las Vegas	I am interested if any falls through

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)