• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Nice Aluminium Enclosure and Knob for an Amp

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
All Aluminium construction. Recessed knob and power switch. The knob is mounted with an encoder but would work fine with a pot. It is mounted on a clear acrylic plate so you can see light from inside the case, looks cool with an LED behind it. I've drilled a few holes in the base plate but nothing that would prevent it from being used for anything else

Approx outside dimensions: 320 x 180 x 65mm

Comes with the knob, nice speaker and RCA connectors, IEC power connector, front switch, all screws etc.

£40
Buyer pays postage

An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.