FS: Four AESpeakers Lambda TD10M High Efficiency Midbass Drivers (Acoustic Elegance)

opc · 8th May 2011, 03:12 PM

Hi Guys,

I've got a quad of brand new AESpeakers TD10M midbass drivers that were intended for a project that fell to the wayside when I finished my line arrays. On that note, I'm looking to sell all four drivers to someone who can actually use them.

They've all been broken in, and measured in a test box. I can include FR and impedance data if requested. They're in perfect condition with the original boxes and packing material.

These retail for $269 each, and I'm asking $800 for all four. I'll consider selling them in pairs, but priority will be give to anyone wanting all four.

I will also split shipping with the buyer providing it's reasonable. If you want them shipped overseas, then you're on your own.

Cheers,
Owen

jmillerdoc · 8th May 2011, 06:10 PM

4 or 8 ohm?

opc · 8th May 2011, 07:48 PM

They're 8 ohm. The impedance graph is attached in the previous post. (actually looks more like 10 ohms)

Cheers,
Owen

Fasen · 13th May 2011, 06:41 PM

How large a box do they need (with 1 or 2 units pr box.) Closed or BR.?

opc · 16th May 2011, 03:14 AM

Hi Vasestar,

You'd be looking at about 0.25 cubic feet per driver for a Q of 0.7 in a sealed box. I would personally go a bit bigger, but that's just me.

As far as BR goes, I'd probably go for about 1 cubic foot and a 55Hz tuning per driver.

Regards,
Owen

Fasen · 16th May 2011, 07:49 AM

Ok thanks :-)

Face · 27th May 2011, 04:59 PM

These are all sold.

opc · 27th May 2011, 06:18 PM

The second pair should ship out in an hour or so!

27th May 2011, 04:59 PM	#7
Face diyAudio Member Join Date: May 2007	These are all sold. __________________ "If it measures good and sounds bad, -- it is bad. If it sounds good and measures bad, -- you've measured the wrong thing." Daniel R. von Recklinghausen

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Acoustic Elegance lambda dipole12	Tazzz	Swap Meet	0	26th March 2011 04:45 PM
FS Acoustic Elegance Lambda TD12H 8 ohm pair of woofers	speakerdealz	Swap Meet	0	16th March 2011 04:48 PM
FS: 2x Lambda Acoustics TD15M 15" High Efficiency drivers	Rescue Toaster	Swap Meet	2	4th June 2006 03:18 PM
Acoustic Elegance/Lambda?	Sheldon	Subwoofers	33	5th November 2005 04:11 PM
high efficiency 10-12" midbass drivers	Puggie	Multi-Way	3	19th August 2005 03:35 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th May 2011, 06:10 PM	#2
jmillerdoc diyAudio Member Join Date: Mar 2009 Location: Lawton, OK, USA	4 or 8 ohm?

8th May 2011, 07:48 PM	#3
opc diyAudio Member Join Date: Oct 2004 Location: Ottawa, Ontario, Canada	They're 8 ohm. The impedance graph is attached in the previous post. (actually looks more like 10 ohms) Cheers, Owen

13th May 2011, 06:41 PM	#4
Fasen diyAudio Member Join Date: Jun 2006	How large a box do they need (with 1 or 2 units pr box.) Closed or BR.?

16th May 2011, 03:14 AM	#5
opc diyAudio Member Join Date: Oct 2004 Location: Ottawa, Ontario, Canada	Hi Vasestar, You'd be looking at about 0.25 cubic feet per driver for a Q of 0.7 in a sealed box. I would personally go a bit bigger, but that's just me. As far as BR goes, I'd probably go for about 1 cubic foot and a 55Hz tuning per driver. Regards, Owen

16th May 2011, 07:49 AM	#6
Fasen diyAudio Member Join Date: Jun 2006	Ok thanks :-)

27th May 2011, 06:18 PM	#8
opc diyAudio Member Join Date: Oct 2004 Location: Ottawa, Ontario, Canada	The second pair should ship out in an hour or so!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)