Eton 5-880 Pair $150

perceptionchanges · 26th April 2011, 02:18 AM

I bought these for a project that never materialized so no sense in letting them sit on my shelf!
They are in near mint condition and look new except for some solder on the terminals.

kmibb · 26th April 2011, 06:06 PM

Is that USD or CND? What does shipping usually cost to the US?

perceptionchanges · 27th April 2011, 01:02 PM

USD is fine, and lets call shipping to the states $25 flat rate. It'll most likely be more but I really can't tell without a zip code.
If you want me to see if it is less than $25 please send me your shipping info.

perceptionchanges · 16th May 2011, 12:33 AM

$140 + shipping

perceptionchanges · 22nd May 2011, 06:44 PM

bump

$125 + shipping!

jmillerdoc · 22nd May 2011, 10:53 PM

Hmmmm....I wonder if I could build an MTM.5 with six of these? I have a quad already with plans to build GR Research's Diluceo's as soon as the ARG2's get fixed.

This is a real steal on these drivers.....

perceptionchanges · 23rd May 2011, 03:11 AM

Sure would be hard to go wrong with my price! I traded them quite a while ago for a turntable with plans to use them as a midrange for a 3 way but then bought a ribbon tweeter I cross at 1500hz, so now I would like something bigger for mids. If you happen to have a pair of Seas Excel w22's around then I would trade + cash.

jmillerdoc · 23rd May 2011, 03:26 AM

I do have a pair of Seas 10" woofers, aluminum cone with black phase plug. O don't remember the model number and I am out of town until Friday. They are very nice with cast frames. If these might be players for you let me know and I will check the exact model for you.

perceptionchanges · 03:54 AM

The 10's might be a bit big for me, looks like they are made for a 1000hz crossover. Looking forward to hearing which ones they are though.

As far as me, I have feedback on canuckaudiomart as " kcross " and ebay as " snokerooney ".

jmillerdoc · 23rd May 2011, 07:35 AM

I will let you know this Friday unless I can get my wife to pull them out of the closet sooner and take some pics for you....don't hold your breath on that though.....the only way that will happen is if I can convince here they may be sold and leaving the house!

26th April 2011, 02:18 AM	#1
perceptionchanges diyAudio Member Join Date: Apr 2010	Eton 5-880 Pair $150 I bought these for a project that never materialized so no sense in letting them sit on my shelf! They are in near mint condition and look new except for some solder on the terminals.

22nd May 2011, 06:44 PM	#5
perceptionchanges diyAudio Member Join Date: Apr 2010	$125 + shipping! bump $125 + shipping!

23rd May 2011, 03:51 AM	#9
perceptionchanges diyAudio Member Join Date: Apr 2010	The 10's might be a bit big for me, looks like they are made for a 1000hz crossover. Looking forward to hearing which ones they are though. As far as me, I have feedback on canuckaudiomart as " kcross " and ebay as " snokerooney ". Last edited by perceptionchanges; 23rd May 2011 at 03:54 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eton 5-880/25	GOWA	Swap Meet	8	23rd June 2011 05:12 PM
WTB: ETON 5-880 pr used	jmillerdoc	Swap Meet	2	6th July 2010 02:55 PM
Help Modeling TQWL on Eton 5-880 driver	jmillerdoc	Full Range	8	4th September 2009 04:04 PM
Eton 5-880	jmillerdoc	Multi-Way	2	25th July 2009 10:17 PM
Eton 5-880 Hex 24	Dickduff	Swap Meet	6	15th October 2008 08:08 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

26th April 2011, 06:06 PM	#2
kmibb diyAudio Member Join Date: Mar 2010	Is that USD or CND? What does shipping usually cost to the US?

27th April 2011, 01:02 PM	#3
perceptionchanges diyAudio Member Join Date: Apr 2010	USD is fine, and lets call shipping to the states $25 flat rate. It'll most likely be more but I really can't tell without a zip code. If you want me to see if it is less than $25 please send me your shipping info.

16th May 2011, 12:33 AM	#4
perceptionchanges diyAudio Member Join Date: Apr 2010	$140 + shipping

22nd May 2011, 10:53 PM	#6
jmillerdoc diyAudio Member Join Date: Mar 2009 Location: Lawton, OK, USA	Hmmmm....I wonder if I could build an MTM.5 with six of these? I have a quad already with plans to build GR Research's Diluceo's as soon as the ARG2's get fixed. This is a real steal on these drivers.....

23rd May 2011, 03:11 AM	#7
perceptionchanges diyAudio Member Join Date: Apr 2010	Sure would be hard to go wrong with my price! I traded them quite a while ago for a turntable with plans to use them as a midrange for a 3 way but then bought a ribbon tweeter I cross at 1500hz, so now I would like something bigger for mids. If you happen to have a pair of Seas Excel w22's around then I would trade + cash.

23rd May 2011, 03:26 AM	#8
jmillerdoc diyAudio Member Join Date: Mar 2009 Location: Lawton, OK, USA	I do have a pair of Seas 10" woofers, aluminum cone with black phase plug. O don't remember the model number and I am out of town until Friday. They are very nice with cast frames. If these might be players for you let me know and I will check the exact model for you.

23rd May 2011, 07:35 AM	#10
jmillerdoc diyAudio Member Join Date: Mar 2009 Location: Lawton, OK, USA	I will let you know this Friday unless I can get my wife to pull them out of the closet sooner and take some pics for you....don't hold your breath on that though.....the only way that will happen is if I can convince here they may be sold and leaving the house!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read