WTB: small quantity of 0.020” Kester 44 (63/37) solder; Hakko T-0.8D tip

[rif]

I'm guessing I only need 10-20 feet.

I have a small SMD project (grubdac) and I don't want to purchase an entire lb. Or a new tip if I can avoid it.

The Hakko tip is replaced by T18-D08, either is fine.

I would be open to a trade – I have a spool, approx 1 lb, of Wonder Solder UltraClear by TRT that I purchased several years ago.

I also have unused Hakko tips; 900M-T-0.2RB/P (30 degree bend) and 900MT-0.5C/P (45 degree bevel).

[theAnonymous1]

Would a 900M-T-I work for you? I have a bunch of them; they are what I use now for SMD.

If you have a ratshack near by, their 0.020" silver bearing electronics solder is great for surface mount work. It's all I use since I prefer to by locally when possible.

[eyoung]

I use the ratshack 63/47 hightech solder really easy to use and reasonably cheap in small quantities.

Regards, E

[rif]

theAnonymous1 and eyoung:
thanks for the ratshack tip. I picked up some 0.020" silver (not lead-free); they didn't have any 63/37 in my size.

theAnonymous1
I'll try the tip - let me know a $$, send me an email. Is that the custom on this board? I take it you're a little paranoid about giving out personal info, huh?

[theAnonymous1]

Originally Posted by rif

I picked up some 0.020" silver (not lead-free); they didn't have any 63/37 in my size.

That's the stuff; it flows well and makes nice shiney joints.

Just PM me your addy and I will send you one of those tips, no charge. I have more than I need.

[rif]

Thanks again, You've got a PM