WTD: IRLZ24N N CHANNEL POWER RECTIFIER

grahamfocal · 05:06 PM

Does anyone have any of the above, only need 2.
IRLZ24N international rectifier N channel power mosfets
I placed an order with Digi-Key and forgot these, so if I now order them its going to cost me £13.00 for 2 parts costing £0.90p each.
my fault, I may have to bite the bullet, but thought I would try you guys first.

please PM me if you have any, prepared to offer good price for them....

grahamfocal · 9th April 2011, 06:54 PM

Okay, this is weird, I seem to have had a reply from someone (popped up on my email) but nothing on here.
Anyway the code is correct. IRLZ24N
I am building the following power supply.
The σ11 Regulated Power Supply
item numbers Q13 and Q14

pidesd · 9th April 2011, 07:27 PM

ebay?

how can you forget the most important part?

grahamfocal · 9th April 2011, 09:15 PM

Quote:

Originally Posted by pidesd

ebay?

how can you forget the most important part?

I know I feel bad dont worry

qusp · 9th April 2011, 10:45 PM

they really should be matched, so buying 2 isnt really going to set you right

grahamfocal · 10th April 2011, 08:48 AM

Quote:

Originally Posted by qusp

they really should be matched, so buying 2 isnt really going to set you right

according to the specs of the 'kit' they dont have to be matched.

qusp · 11th April 2011, 09:11 AM

ahh sorry your right, its for the s22 the opposing mosfets in the same position are matched, so i just bought enough to match all round. although as you know, they are not rectifiers, the mur820 are the rectifiers, these are mosfet pass devices

9th April 2011, 05:05 PM	#1
grahamfocal diyAudio Member Join Date: Jan 2008 Location: Tintinhull Somerset	WTD: IRLZ24N N CHANNEL POWER RECTIFIER Does anyone have any of the above, only need 2. IRLZ24N international rectifier N channel power mosfets I placed an order with Digi-Key and forgot these, so if I now order them its going to cost me £13.00 for 2 parts costing £0.90p each. my fault, I may have to bite the bullet, but thought I would try you guys first. please PM me if you have any, prepared to offer good price for them.... __________________ I've got an idea--an idea so smart that my head would explode if I even began to know what I'm talking about Last edited by grahamfocal; 9th April 2011 at 05:06 PM. Reason: missed a line for PMing me

9th April 2011, 06:54 PM	#2
grahamfocal diyAudio Member Join Date: Jan 2008 Location: Tintinhull Somerset	Okay, this is weird, I seem to have had a reply from someone (popped up on my email) but nothing on here. Anyway the code is correct. IRLZ24N I am building the following power supply. The σ11 Regulated Power Supply item numbers Q13 and Q14 __________________ I've got an idea--an idea so smart that my head would explode if I even began to know what I'm talking about

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
external power supply, rectifier in or out?	poolorpond	Power Supplies	26	28th November 2011 05:13 PM
Bridge rectifier power source	imsellingmyfoot	Parts	4	21st December 2010 02:37 PM
WTD: Linear Power 1001sw schematic	MatthewS	Car Audio	0	14th October 2008 04:02 AM
Gas-Rectifier power supply	bogdan_borko	Tubes / Valves	10	3rd October 2006 06:12 PM
WTD Power amp modules for 48v PSU	ianfromnotts	Swap Meet	0	22nd May 2006 10:27 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th April 2011, 07:27 PM	#3
pidesd diyAudio Member Join Date: Apr 2008 Location: montreal (cotes des neiges yo!)	ebay? how can you forget the most important part?

9th April 2011, 10:45 PM	#5
qusp Sometimes a square peg fits a round hole just fine diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	they really should be matched, so buying 2 isnt really going to set you right

11th April 2011, 09:11 AM	#7
qusp Sometimes a square peg fits a round hole just fine diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	ahh sorry your right, its for the s22 the opposing mosfets in the same position are matched, so i just bought enough to match all round. although as you know, they are not rectifiers, the mur820 are the rectifiers, these are mosfet pass devices

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)