WTB: Tangband 1772 and Pioneer B20FU20-51FW

KB85 · 21st March 2011, 05:44 PM

Looking for a pair of Tangbands and several pair of the Pioneers. Thanks

Bob Brines · 9th April 2011, 05:51 PM

I have 4 BOFU's.

2 are virgin -- no solder, no mounting marks. These have been broken-in for 1 hour then T/S tested.

2 have been Mod-Podge'd They have been used for ~200 hours and other than the MP, are pristine.

$100 to your door for the lot in the original 4x box. Credit card through Paypal.

Bob

KB85 · 9th April 2011, 09:11 PM

Quote:

Originally Posted by Bob Brines

I have 4 BOFU's.

2 are virgin -- no solder, no mounting marks. These have been broken-in for 1 hour then T/S tested.

2 have been Mod-Podge'd They have been used for ~200 hours and other than the MP, are pristine.

$100 to your door for the lot in the original 4x box. Credit card through Paypal.

Bob

Timing is everything... I was about to purchase your plans for the TB-20 this weekend. Soooo... if the isnt any major down side to the Mog Podge'd BOFu's then I'll take the 4 speakers AND the TB20 plans. PM me a paypal invoice?

And since I have your attention, can the TB20 be made a few inches narrower, making them either taller or deeper to match internal volume? Thanks, Scott

Bob Brines · 10th April 2011, 01:05 AM

Quote:

Originally Posted by KB85

Timing is everything... I was about to purchase your plans for the TB-20 this weekend. Soooo... if the isnt any major down side to the Mog Podge'd BOFu's then I'll take the 4 speakers AND the TB20 plans. PM me a paypal invoice?

The MP probably helps the BOFU. Smooths out the cone cry. Any damage done by MP is at the upper end and the BOFU has too little top to notice. I thought it was an improvement. Since you will have a virgin pair, you can judge for yourself.

I will PM you in a moment.

Quote:

And since I have your attention, can the TB20 be made a few inches narrower, making them either taller or deeper to match internal volume? Thanks, Scott

Well, maybe. The cabinet is 11 1/2" wide. The sides are 3/4" each, leaving 10". The driver frame is almost 8 3/4" The plans show a supra baffle that is 10" wide with a 3/4" roundover. The driver is actually wider than the flat on the supra baffle. How narrow do you want to go?

Bob

Bob Brines · 10th April 2011, 12:58 PM

SOLD

KB85 · 15th April 2011, 06:17 PM

Received exactly as described, fast shipping too... Thanks Bob

21st March 2011, 05:44 PM	#1
KB85 diyAudio Member Join Date: Sep 2006	WTB: Tangband 1772 and Pioneer B20FU20-51FW Looking for a pair of Tangbands and several pair of the Pioneers. Thanks

9th April 2011, 05:51 PM	#2
Bob Brines diyAudio Member Join Date: Jan 2003 Location: Hot Spring Village AR	I have your BOFO's I have 4 BOFU's. 2 are virgin -- no solder, no mounting marks. These have been broken-in for 1 hour then T/S tested. 2 have been Mod-Podge'd They have been used for ~200 hours and other than the MP, are pristine. $100 to your door for the lot in the original 4x box. Credit card through Paypal. Bob

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FYI Pioneer B20FU20-51FW	jackfish	Full Range	2	19th April 2009 09:38 AM
Parameters for Pioneer B20FU20-51FW	jackfish	Full Range	25	6th March 2009 08:16 PM
Pioneer B20FU20-51FW 8 TL?	aznboi3644	Full Range	15	18th December 2007 10:01 AM
Pioneer B20FU20-51FW Project. Help Please.	squareguy	Full Range	11	19th July 2007 08:12 AM
pioneer b20fu20-51fw	injunandrew	Full Range	11	18th April 2005 09:30 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th April 2011, 12:58 PM	#5
Bob Brines diyAudio Member Join Date: Jan 2003 Location: Hot Spring Village AR	SOLD

15th April 2011, 06:17 PM	#6
KB85 diyAudio Member Join Date: Sep 2006	Received exactly as described, fast shipping too... Thanks Bob

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)