I have 2 excellent Toriod trafo's for sale.
The big one (photo 1) is 800-1KVA 52-0-52Vac with 12 gauge secondaries. One hellava transformer , it will melt screwdrivers with greatest of ease and has dual primaries - very quiet as well. I am asking $40 USD - included is the mounting hardware/bolt - neoprene insulating spacers.
The small one is a dual secondary (28-0-28 and 14-0-14Vac) 200Va unit. All tested and also is made by Tibi electronics. Mounting hardware included. I ask $25 USD for this one (picture 2).
OS
The big one (photo 1) is 800-1KVA 52-0-52Vac with 12 gauge secondaries. One hellava transformer , it will melt screwdrivers with greatest of ease and has dual primaries - very quiet as well. I am asking $40 USD - included is the mounting hardware/bolt - neoprene insulating spacers.
The small one is a dual secondary (28-0-28 and 14-0-14Vac) 200Va unit. All tested and also is made by Tibi electronics. Mounting hardware included. I ask $25 USD for this one (picture 2).
OS
Attachments
BUMP , These items compare to this for the large unit :
Antek - AN-10450
I would take $30 USD , shipping would be about $15 USPS medium flat rate box US/canada (preferable) 40+ for international.
Small unit is this :
Antek - AN-2228
I would take $15 + $15 shipping (could be $10 for flat rate video/small USPS).
OS
Antek - AN-10450
I would take $30 USD , shipping would be about $15 USPS medium flat rate box US/canada (preferable) 40+ for international.
Small unit is this :
Antek - AN-2228
I would take $15 + $15 shipping (could be $10 for flat rate video/small USPS).
OS
Small trafo still available .... will add these fine amps (below) to the "yardsale". They are composed of about $50-60 worth of fine mouser components. They have faithfully performed , have NO "thump" , noise , or ANY stability issues. They are very similar to Bob Cordell's amplifier example with the addition of Cap multipliers and a robust output stage. 4 months of flawless operation , all set to 70mA bias per OP device , 6.2mA VAS and 1.5mA LTP current "Very Blameless" 
PS - 250 watts each /8R , runs on 55-80V rails , all components rated to 100V , fits on a 125mm tall heatsink.
$55 USD OBO for both !
OS
PS - 250 watts each /8R , runs on 55-80V rails , all components rated to 100V , fits on a 125mm tall heatsink.$55 USD OBO for both !
OS
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.