|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Swap Meet Sell your stuff here, who knows, some other fanatic might be interested! |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
10th March 2011, 02:39 AM
|
#1 |
|
diyAudio Member
Join Date: May 2005
Location: Melbourne
|
R.Stens X-Ono boards populated - Melbourne AUS
If anyone is interested I have populated set of R Stens Ono boards I'm selling.
The boards are running and tested, however had I purchased a load of sk170 so-called "BL" (more like GR's) from futurlec which turned out to be useless junk. I have had to cut out all but one pair to get the boards operating. It plays fine with MM cart but haven't been able to test MC functionality. I have a bunch of replacements which measure close to correct spec, but the boards need the old sk170's desoldered and replaced with the new ones. The boards have been built up with 2SK389BL's, dale resistors, panasonic elec and film caps, polystyrene filter caps, MKP1837 poly caps and Clarity Cap SA blocking caps on the outputs. I'm asking $300AU/US plus shipping, as boards alone cost me $220+. I also have 2 x 240V primary Harbuch trafo's to suit which I'll sell for $50AU the pair plus shipping. I'll post pix in the next couple of hours. cheers Paul |
|
|
10th March 2011, 04:26 AM
|
#2 |
|
diyAudio Member
Join Date: May 2005
Location: Melbourne
|
Pix and small correction.
Correction to above - the clarity caps are PX rather than SA.
Each image below is about 1.1Mb http://demo.mactrix.com.au/xono/Xono1.jpg http://demo.mactrix.com.au/xono/Xono2.jpg http://demo.mactrix.com.au/xono/Xono3.jpg http://demo.mactrix.com.au/xono/Xono4.jpg http://demo.mactrix.com.au/xono/Xono5.jpg http://demo.mactrix.com.au/xono/Xono6.jpg http://demo.mactrix.com.au/xono/Xono7.jpg http://demo.mactrix.com.au/xono/Xono9.jpg Estimated airmail postage of boards to the US is around $60-70. cheers Paul Last edited by spzzzzkt; 10th March 2011 at 04:36 AM. |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FS: Ono / Xono boards fully populated working | dhole | Swap Meet | 3 | 16th July 2007 07:11 PM |
| Help wanted in speaker choice, Melbourne (Aus) | bgbiteme | Multi-Way | 7 | 5th June 2007 05:18 AM |
| FYI. Speaker Boxes on eBay in Melbourne (Aus) | Cloth Ears | Swap Meet | 0 | 3rd January 2007 11:18 PM |
| Aleph 2 populated boards | fepie | Pass Labs | 0 | 16th September 2005 06:53 AM |
| FS: 142 litre EBS Shiva, Melbourne AUS | griff | Swap Meet | 2 | 15th August 2002 11:37 AM |
| New To Site? | Need Help? |
| Page generated in 0.08131 seconds (76.54% PHP - 23.46% MySQL) with 10 queries |
