Shed clearance, Sydney - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th March 2011, 10:32 PM   #1
diyAudio Member
 
Join Date: Feb 2002
Location: Western Sydney
Default Shed clearance, Sydney

Shed Clearance –need to clear out my old shed so I can knock it down & build a bigger one! It’s all gotta go, make me an offer…

Dual cone drivers, pairs, 8”:
RS 40-1286C as new
MSP 8TAX 15 ohm alnico
Magnavox 8P1X 15 ohm alnico, a bit rough cosmetically
MSP 96PSX 15 ohm alnico 6”x9” damared cones

Woofers:
Single Jaycar CW2142 8” carbon fiber cone 120W (& 50L box if you want it)
Single Altronics C3024 8” Poly woofer (& 30L box if you want it) (these are still available)

EV T35A tweeters pair, ceramic magnets, a bit rough cosmetically

Akai GX4000D tape recorder + ~40 reels of tape

ECC83 Philips used ~ 30, scavenged from an organ 40 years ago

Valve transformers:
Hammond transformers from aforementioned organ:
Pair of output transformers for 6L6 amp ~ 25W, 6600:8 Ohm
Pair of power transformers to match, one rated at 125VA, no load voltage 330-0-330, the other which has a massive heater winding for all those valves, 180VA, no load voltage 360-0-360. Both have 6.3 & 5V secondaries, & dual voltage primaries.
I have repainted these with grey crackle finish, they look great.

5 or 6 sets of Power Transformer + pair of OPTs for low power SE amps, both 8k & 10K scavenged from old Radiograms

Happy to deliver in Western Sydney, elsewhere in Aus, PM me…
__________________
Impedance varies with frequency, use impedance plots of your drivers and make crossover calculations using the actual impedance of the driver at the crossover frequency
  Reply With Quote
Old 9th March 2011, 11:05 PM   #2
diyAudio Member
 
Join Date: Jan 2010
Hi
PM sent about the ECC83 Philips

Regards

Last edited by Meganinja; 9th March 2011 at 11:08 PM.
  Reply With Quote
Old 10th March 2011, 12:07 AM   #3
Certified Crazy.
diyAudio Member
 
Join Date: Dec 2008
Location: Toronto, Canada
Quote:
Originally Posted by Meganinja View Post
PM sent about the ECC83 Philips
Dangit!
  Reply With Quote
Old 10th March 2011, 02:01 AM   #4
diyAudio Member
 
Join Date: Feb 2002
Location: Western Sydney
ECC83s spoken for, (I may have a few more....)
__________________
Impedance varies with frequency, use impedance plots of your drivers and make crossover calculations using the actual impedance of the driver at the crossover frequency
  Reply With Quote
Old 10th March 2011, 04:31 AM   #5
diyAudio Member
 
Join Date: Feb 2002
Location: Western Sydney
Hammond trafos spoken for...
__________________
Impedance varies with frequency, use impedance plots of your drivers and make crossover calculations using the actual impedance of the driver at the crossover frequency
  Reply With Quote
Old 12th March 2011, 07:49 PM   #6
diyAudio Member
 
Join Date: Feb 2002
Location: Western Sydney
Take 'em now or the bin gets it!!

Dual cone drivers, pairs, 8”: $10 for all 4 pairs...
RS 40-1286C as new
MSP 8TAX 15 ohm alnico
Magnavox 8P1X 15 ohm alnico,
MSP 96PSX 15 ohm alnico 6”x9”

Woofers: $15 Ea
Single Jaycar CW2142 8” carbon fiber cone 120W
Single Altronics C3024 8” Poly woofer

EV T35A tweeters pair, ceramic magnets - $15

Akai GX4000D tape recorder + ~40 reels of tape: $20

5 sets of Power Transformer + pair of OPTs for low power SE amps, both 8k & 10K scavenged from old Radiograms - build youself a guitar amp : $10 per set
__________________
Impedance varies with frequency, use impedance plots of your drivers and make crossover calculations using the actual impedance of the driver at the crossover frequency
  Reply With Quote
Old 12th March 2011, 10:16 PM   #7
diyAudio Member
 
Join Date: Feb 2002
Location: Western Sydney
all transformers gone, Thanks MegaNinja!
__________________
Impedance varies with frequency, use impedance plots of your drivers and make crossover calculations using the actual impedance of the driver at the crossover frequency
  Reply With Quote
Old 13th March 2011, 06:07 AM   #8
diyAudio Member
 
Brisso57's Avatar
 
Join Date: Sep 2005
Location: the leafy west of Brisbane
Default Good for a cheap OB ...

The radio shack 40-1286C's would be great for a cheap OB experiment.

Doug
__________________
A speaker-builder's parable: "That burned down, fell over, then sank into the swamp. But the fourth one stayed up. And that's what you're going to get, Lad, the strongest castle of all."
  Reply With Quote
Old 13th March 2011, 09:46 PM   #9
diyAudio Member
 
Join Date: Feb 2002
Location: Western Sydney
re:'The radio shack 40-1286C's would be great for a cheap OB experiment.' - yep,
& with them you could use the other pairs of 8" drivers with a minimal xover to get more Sd for the low end...
__________________
Impedance varies with frequency, use impedance plots of your drivers and make crossover calculations using the actual impedance of the driver at the crossover frequency
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
MC240 found in a shed. Wardsweb Tubes / Valves 50 25th June 2011 01:39 AM
Brian LM 4780 rocks the Shed pete.a Chip Amps 12 30th April 2010 12:16 AM
DVD motor shed A'af Digital Source 0 2nd January 2005 05:12 PM


New To Site? Need Help?

All times are GMT. The time now is 12:51 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2