|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Swap Meet Sell your stuff here, who knows, some other fanatic might be interested! |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Apr 2004
Location: Los Angeles, CA, USA
|
Hello,
Should of consolidated these all to begin with... ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~ I have a NHT A1 monoblock (full-range, but also a great sub-amp). Have a NHT A1 amplifier, which is usually used for subwoofers but is actually completely full-range. On those lines, the amp does NOT have a low-pass crossover, gain, or phase control, so all that must be handled by the active crossover/HT receiver/etc. up the signal chain. The amp sounds great though, and the auto-on and balanced XLR-in are great features. Have the original box/manual. $150 local, $170 shipped to the west coast, $180 shipped to the east coast. Amp is 200/300 watts RMS into 8/4 ohms. Electronics | Mono Amplifier | High End Home Theater http://www.onecall.com/product/NHT/A...fier/_/R-15948 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~ Have a great QSC amplifier I'm selling to pay for a bigger one. Only used at home for a home stereo. In perfect condition, though I don't have the original box. Found a great box from a previous amplifier in the closet - so can ship this out. Shipping would be $30 on west Coast and $40 towards the east. This is a GREAT amplifier for the sub/woofer section on an active 2/3/4 way. Specifications, from this site: QSC - PLX Series Amplifiers STEREO MODE, Both Channels Driven 8 ohms 20 Hz-20 kHz 0.03% THD: 300W 4 ohms 20 Hz-20 kHz 0.05% THD: 500W 2 ohms 1 kHz 1% THD: 800W BRIDGE MONO MODE 16 ohms 20 Hz-20 kHz 0.1% THD: 600W 8 ohms 20 Hz-20 kHz 0.1% THD: 1100W 4 ohms 1 kHz 1% THD: 1600W Signal to Noise (20 Hz-20 kHz): <-107 dB Input Sensitivity @ 8 ohms: 1.2Vrms Input Sensitivity @ 4 ohms: 1.1Vrms Voltage Gain: 40x (32 dB) Output Circuitry: AB Power Requirements (1/8 Power Pink Noise @ 4 Ohm): 10A * Exclusive PowerLight power supply for superior bass and lighter weight * Ultra-low distortion (0.03% THD at 8 ohms) & studio-quality noise floor (-107 dB) * LED indicators include bridge mono and parallel input modes * Compact 2 RU, 21 lbs. and 13" deep chassis fits into any rack * Selectable clip limiters and subsonic filters reduce distortion and protect speakers * Variable-speed fan for low noise and solid 2 ohm performance * Both 1/4" TRS & XLR inputs, Speakon® and shock-proof binding post outputs * 3-year warranty plus optional 3-year extension available Owner's manual: http://media.qscaudio.com/pdfs/plxuser.pdf PLX series specs: http://media.qscaudio.com/pdfs/plxspec.pdf ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~ Carver Pro ZR1000 One of the best amps I've ever heard (went from a pair of Monarchy SM-70 Class A monoblocks to the Carver...) I am the original owner of the Carver... have the box and manual. I had the dealer replace the fan (yes, it's unfortunately fan-cooled) with a quiet one, which is pretty inaudible from more than a few feet away. $270 local/$300 west coast/$310 east coast Specs are: 225 wRMS @ 8 ohms stereo 350 wRMS @ 4 ohms stereo 700 wRMS @ 8 ohms bridged mono Has Speakon outputs, etc., selectable 40/80 Hz. high-pass filter, clip limiting, etc. Specs (from my Dropbox): http://dl.dropbox.com/u/1665409/CARV...000%201600.pdf ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~ A used pair of Magneplanar MMGs, in great condition, though an older pair. Friend of mine recently moved into a smaller apartment and doesn't have room for them. $300 for the pair, definitely local pickup only. Used with the home theater receiver below. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~ Harmon Kardon AVR 310 receiver for sale. Really nice unit, tons of features, and a great amplifier section. Here's the factory specs sheet: http://www.harmankardon.com/resource...ion/AVR310.pdf 50 watts continuous, high current high bandwidth amplifier section (hi-fi watts, not Sony/Kenwood/JVC/etc. watts!) MP3 decoding automatic speaker calibration Logic 7 surround processing, as well as the usual Dolby Digital, DTS, etc. universal remote a 2nd remote Have original box, manual, everything! This receiver has GREAT reviews on Audioreview.com: Harman Kardon AVR 310 Reviews ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~ Polk Audio PSW10 10" powered subwoofer for $60. Sorry, local pickup only. |
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Apr 2004
Location: Los Angeles, CA, USA
|
Receiver sold!
thanks, -Tal |
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Apr 2004
Location: Los Angeles, CA, USA
|
QSC amp, Carver amp, and Magnepan speakers still available (the Magneplanars MMG only available locally in Los Angeles, thanks).
-Tal |
|
|
|
|
#4 |
|
diyAudio Member
Join Date: Apr 2004
Location: Los Angeles, CA, USA
|
QSC, Carver Pro, and NHT amplifier still available; receiver, subwoofer, and Magnepan MMGs all sold.
thanks, -Tal |
|
|
|
|
#5 |
|
diyAudio Member
Join Date: Apr 2004
Location: Los Angeles, CA, USA
|
Everything sold, thanks!
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FS IN LOS ANGELES: QSC PLX-1602 amplifier | taloyd | Swap Meet | 4 | 15th April 2011 04:39 AM |
| FS: lightly used NHT A1 full-range/subwoofer amplifier | taloyd | Swap Meet | 5 | 27th February 2011 04:46 PM |
| 6v6 PP maggie with Polk SDA 1C | mackinthebox | Tubes / Valves | 2 | 15th November 2010 05:32 PM |
| Help on QSC PLX 1602 | minniew | Solid State | 2 | 7th December 2007 12:54 PM |
| 120V QSC PLX 230v conversion??? | bOOgy77 | Class D | 1 | 5th December 2004 07:25 PM |
| New To Site? | Need Help? |
| Page generated in 0.09625 seconds (80.37% PHP - 19.63% MySQL) with 11 queries |