Garage Sale / Yard Sale - Lots of Stuff (Part 3)

[PHilgeman]

As I continue to clean out my workroom...

Transformers:
One Shielded EI Core transformer, 37-0-37 secondary, nice copper shielding, weighs about 7lbs $15.00, ships in medium flat rate box.



Electronic Parts:

Auricap 450V, 1.5uF Capacitors, Excellent Condition, $20 for the pair. Ships in a small flat rate box.


Copper Foil Air Core Inductors:

Two of 2.2mH 14 AWG - $20.00 Each
Single 3.9mF 12 AWG - $40.00
Single 0.68mH 16AWG - $10.00


Ring-Lit, Flush Mount Push-Button Switch, 24Vdc Contact, Amber... $5.00


Two Project Boxes with end-plates. They are identical to these:
Penn-Elcom R1197/100 Heat Sink Box 4.13" x 2.36" x 4" L
$5.00 Each with the end plates.

NAP-140 Clone Kit, $50.00, should fit in a medium flat-rate box:


OTHER STUFF:

Seas Coaxial-Mount Tweeters. These can be adapted to fit inside any of their 29mm diameter VC Woofers, like the W18, W22 etc. Two are in pristine condition, one lost a lead (but the VC Leadout is still there and accessible) and has the mounting post removed (you will have to do this anyway to mount them in the woofer). $25.00 each for the good ones, $15.00 for the one with the broken lead. Ships in a small flat rate box.


Medical Grade 1:1 EI Core Isolation Transformer - 440VA, has a 2.5A breaker installed, I added some X-Caps and a CMC to it, sounds very nice for source components and preamplifiers. Probably vastly under-rated as it weighs at least 15 lbs, $30.00:



Damping Materials, this is like BH5 or SonicBarrier but much better, it includes two of the mass-loaded layers, I don't think this is commercially available anywhere:


I have several pieces of this as follows (All in inches):
18x15
6x58
12x22
18x26

Single mass-loaded layer:
18x24 (4x6" rectangle cut out of one corner)

$10.00 per square foot. Depending on how you can tolerate it being cut, I can ship in flat-rate boxes or custom sized boxes.

Flat Rate Boxes in the US:
Small are about $5.50
Medium are about $11.50

They go up to other countries, but not too much, maybe as high as double. I can ship them anywhere needed.

E-Mail and Paypal to pkhilgeman@gmail.com

Thanks for looking

[qusp]

how many va is the EI TX? even though shiping will be a bit crazy if i want it quickly, probably not tooo bad if i can wait a while and i can, but i really need it to be around the 60va rating. i'm interested if you can let me know. thanks mate

[PHilgeman]

I am sure that it is at least 60VA. I have no way to know, other than sheer size, weight and experience. I would guess that it is more like 200VA.

Most of the Hammond units that are ~7lbs are in the 200-250VA Range.

USPS shipping quote was $42.00!!!! EEK.

[qusp]

was hard to get an idea of size with the pic. hmm may still be worthwhile, though a bit large for the d1 mosfet iv stage i planned, which needs about 60-100va. if its 200va i could use it for something else other than planned; looks like a really nice unit.42 bucks is a bit harsh, but about what i expected i guess. is that for 'first class' ? need to think on that and check local supply for a similar custom job. probably it is still a good deal

[RKH]

I am interested in the isolation transformer. Can you estimate shipping to 81301 USA?

Thanks much!

Ryan

[PHilgeman]

NAP-140 Kit, Damping Material are SOLD.

The Isolation Transformer and switch are spoken for, but not paid for yet.

[RKH]

Let me know if I am still in the hunt.

Thanks,
Ryan

[Pocoyo]

Hi Phil

im interested with

Ring-Lit, Flush Mount Push-Button Switch, 24Vdc Contact, Amber... $5.00
Two of 2.2mH 14 AWG - $20.00 Each

can you give me shipping cost to indonesia by registered post/post office
(small flat rate box)

[tg3]

Originally Posted by RKH

Let me know if I am still in the hunt.

Thanks,
Ryan

You are not.

[PHilgeman]

Hey everyone.

Everything shipped yesterday morning.

The only things left are:

Inductors
Seas Tweeters
Project Boxes
Auricaps
EI Core Transformer

Thanks for looking.