FS: Bottlehead S.E.X. Transformer and Choke Set

HiGHFLYiN9s · 27th February 2011, 06:42 PM

Up for sale is a never used set of Transformers and Chokes for the Bottlehead S.E.X. (single ended eXperimenters). $60 shipped in the CONUS, international a little extra.

gmant123 · 27th February 2011, 10:07 PM

Hi, could you give me some technical specifications?

Alberto.

HiGHFLYiN9s · 10:21 PM

The 2 Specos output transformers have the following:
4 or 8 Ohm Secondary Impedance
10, 5, 2.5, 1.25 and 0.62 Wattage Taps
Color Coded Leads

The 2 chokes each have four solder points, not really sure where to find the specs for them though.

I will take $35 for the set of these, didn't realize the Specos were only worth about $12 a pop from Allied.

gmant123 · 27th February 2011, 10:30 PM

Hi:
Secundary 4 and 8ohm ok.

Primary 10k, 5k, 2,5K,1,25K and max 0.68W ?

Thank You!!!

HiGHFLYiN9s · 12:45 AM

Looks like 10 watt max:

Speco 10 Watt, 70 Volt Line Transformer Speco's 70 volt 10 watt line transformer has wattage taps. It has 10, 5, 2.5, 1.25, and 0.625 watt taps.

The chokes are actually made by Bottlehead. I noticed they actually have 5 solder points each and are called the Bottlehead PC-1 (30H 35mADC), series wired, coil 1 goes from tap 1 to 4, coil two goes from 5 to 8.

HiGHFLYiN9s · 4th March 2011, 02:53 PM

$35 shipped ... any takers?

patkhan1 · 3rd June 2011, 07:39 PM

Do you still have them?

27th February 2011, 06:42 PM	#1
HiGHFLYiN9s diyAudio Member Join Date: Jun 2010 Location: East Coast, USA	FS: Bottlehead S.E.X. Transformer and Choke Set Up for sale is a never used set of Transformers and Chokes for the Bottlehead S.E.X. (single ended eXperimenters). $60 shipped in the CONUS, international a little extra. __________________ My DIY Electronics Blog: DIYAudioBlog.com

27th February 2011, 10:07 PM	#2
gmant123 diyAudio Member Join Date: Dec 2009	Data Hi, could you give me some technical specifications? Alberto.

27th February 2011, 10:16 PM	#3
HiGHFLYiN9s diyAudio Member Join Date: Jun 2010 Location: East Coast, USA	The 2 Specos output transformers have the following: 4 or 8 Ohm Secondary Impedance 10, 5, 2.5, 1.25 and 0.62 Wattage Taps Color Coded Leads The 2 chokes each have four solder points, not really sure where to find the specs for them though. I will take $35 for the set of these, didn't realize the Specos were only worth about $12 a pop from Allied. __________________ My DIY Electronics Blog: DIYAudioBlog.com Last edited by HiGHFLYiN9s; 27th February 2011 at 10:21 PM.

28th February 2011, 12:42 AM	#5
HiGHFLYiN9s diyAudio Member Join Date: Jun 2010 Location: East Coast, USA	Looks like 10 watt max: Speco 10 Watt, 70 Volt Line Transformer Speco's 70 volt 10 watt line transformer has wattage taps. It has 10, 5, 2.5, 1.25, and 0.625 watt taps. The chokes are actually made by Bottlehead. I noticed they actually have 5 solder points each and are called the Bottlehead PC-1 (30H 35mADC), series wired, coil 1 goes from tap 1 to 4, coil two goes from 5 to 8. __________________ My DIY Electronics Blog: DIYAudioBlog.com Last edited by HiGHFLYiN9s; 28th February 2011 at 12:45 AM.

4th March 2011, 02:53 PM	#6
HiGHFLYiN9s diyAudio Member Join Date: Jun 2010 Location: East Coast, USA	$35 shipped ... any takers? __________________ My DIY Electronics Blog: DIYAudioBlog.com


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th February 2011, 10:30 PM	#4
gmant123 diyAudio Member Join Date: Dec 2009	Hi: Secundary 4 and 8ohm ok. Primary 10k, 5k, 2,5K,1,25K and max 0.68W ? Thank You!!!

3rd June 2011, 07:39 PM	#7
patkhan1 Nada diyAudio Member Join Date: Feb 2010 Location: Atlanta, USA	Do you still have them?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Bottlehead Paramount amplifiers built by Bottlehead	johnsonad	Swap Meet	2	28th October 2010 12:35 AM
Bottlehead Filament Choke FC-1 for Push-Pull?	Kashmire	Tubes / Valves	0	19th January 2010 02:13 AM
FS: Hammond 1627SEA output transformer + 193H 5H choke	marcutan	Swap Meet	3	5th May 2008 01:12 AM
FS - Bottlehead Foreplay III	john65b	Swap Meet	2	16th July 2007 03:14 AM
Bottlehead Foreplay FS	idex	Swap Meet	3	8th January 2006 11:23 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read