FS IN LOS ANGELES: QSC PLX-1602 amplifier

[taloyd]

$350 for board members! Local pickup only though, as I don't have the original box and don't want to deal with shipping...

Have a great QSC amplifier I'm selling to pay for a bigger one. Only used at home for a home stereo. In perfect condition, though I don't have the original box.

Specifications, from this site: QSC - PLX Series Amplifiers

STEREO MODE, Both Channels Driven
8 ohms 20 Hz-20 kHz 0.03% THD: 300W
4 ohms 20 Hz-20 kHz 0.05% THD: 500W
2 ohms 1 kHz 1% THD: 800W

BRIDGE MONO MODE
16 ohms 20 Hz-20 kHz 0.1% THD: 600W
8 ohms 20 Hz-20 kHz 0.1% THD: 1100W
4 ohms 1 kHz 1% THD: 1600W
Signal to Noise (20 Hz-20 kHz): <-107 dB
Input Sensitivity @ 8 ohms: 1.2Vrms
Input Sensitivity @ 4 ohms: 1.1Vrms
Voltage Gain: 40x (32 dB)
Output Circuitry: AB
Power Requirements (1/8 Power Pink Noise @ 4 Ohm): 10A

* Exclusive PowerLight power supply for superior bass and lighter weight
* Ultra-low distortion (0.03% THD at 8 ohms) & studio-quality noise floor (-107 dB)
* LED indicators include bridge mono and parallel input modes
* Compact 2 RU, 21 lbs. and 13" deep chassis fits into any rack
* Selectable clip limiters and subsonic filters reduce distortion and protect speakers
* Variable-speed fan for low noise and solid 2 ohm performance
* Both 1/4" TRS & XLR inputs, Speakon® and shock-proof binding post outputs
* 3-year warranty plus optional 3-year extension available

Owner's manual: http://media.qscaudio.com/pdfs/plxuser.pdf
PLX series specs: http://media.qscaudio.com/pdfs/plxspec.pdf

[taloyd]

Bump!

[taloyd]

Found a great box from a previous amplifier in the closet - so can ship this out. Shipping would be $30 on west Coast and $40 towards the east. This is a GREAT amplifier for the sub/woofer section on an active 2/3/4 way.

thanks,
-Tal

[taloyd]

Just found out the PLX2-1804 I got to replace this (for higher power) has less than half the damping factor of the 1602. And a MUCH quieter fan - pretty innocuous. Sigh...

-Tal

[taloyd]

QSC amp sold locally!