Wanted: Mills Resistors & other bits...

Jim Leach · 16th February 2011, 12:48 PM

Hello! I searched this section, and also on-line to see if I could buy the few pieces I need. I assume (but have not tried) that Mills will only sell large quantities direct... (Amazon lists a few pieces, but not the values I need)

Anyway, here is what I need:

4 pieces 1k
2 pieces 7k

I also need some quality 40k resistors (Rikens?) 2 pieces

I need a few caps too, but those I should be able to get easily enough (2 4.7nF, 2 400pF) mica or polypropylene (or similar quality).

Finally, some decent RCA and XLR panel mount connectors, which I can get elsewhere; however if you have a lot of stuff, it is certainly easier for me to purchase in one spot!

These parts are to finish up my DAC project...

lil' knight · 16th February 2011, 01:26 PM

Mills Resistors
XLR Chassis
RCA Chassis

Jim Leach · 16th February 2011, 01:36 PM

Very cool re the resistors! Thanks for the link!

The other links seem to be dead-ended (generic page); however I'll give them a call and see what they have.

ticknpop · 16th February 2011, 01:55 PM

Michael Percy and/or Parts Connexion have what you want

taj · 17th February 2011, 02:41 PM

Digi-key also sells Mills resistors. Mills is owned by Huntington. Look for that name.

..Todd

Jim Leach · 17th February 2011, 07:40 PM

Parts connexion seemed to have most of what I wanted.

They did not have 400pF caps however; they have 390 so I was going to try those but would prefer to not deviate from the plan as I don't know the implications of a change...

I tried digikey; however I will try again.

Thanks!

16th February 2011, 12:48 PM	#1
Jim Leach diyAudio Member Join Date: Feb 2010 Location: Back in CT!	Wanted: Mills Resistors & other bits... Hello! I searched this section, and also on-line to see if I could buy the few pieces I need. I assume (but have not tried) that Mills will only sell large quantities direct... (Amazon lists a few pieces, but not the values I need) Anyway, here is what I need: 4 pieces 1k 2 pieces 7k I also need some quality 40k resistors (Rikens?) 2 pieces I need a few caps too, but those I should be able to get easily enough (2 4.7nF, 2 400pF) mica or polypropylene (or similar quality). Finally, some decent RCA and XLR panel mount connectors, which I can get elsewhere; however if you have a lot of stuff, it is certainly easier for me to purchase in one spot! These parts are to finish up my DAC project... __________________ "When the world is running down, you make the best of what's still around."

16th February 2011, 01:26 PM	#2
lil' knight diyAudio Member Join Date: Dec 2009	Mills Resistors XLR Chassis RCA Chassis __________________

16th February 2011, 01:36 PM	#3
Jim Leach diyAudio Member Join Date: Feb 2010 Location: Back in CT!	Very cool re the resistors! Thanks for the link! The other links seem to be dead-ended (generic page); however I'll give them a call and see what they have. __________________ "When the world is running down, you make the best of what's still around."

17th February 2011, 07:40 PM	#6
Jim Leach diyAudio Member Join Date: Feb 2010 Location: Back in CT!	Parts connexion seemed to have most of what I wanted. They did not have 400pF caps however; they have 390 so I was going to try those but would prefer to not deviate from the plan as I don't know the implications of a change... I tried digikey; however I will try again. Thanks! __________________ "When the world is running down, you make the best of what's still around."

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th February 2011, 01:55 PM	#4
ticknpop diyAudio Member Join Date: May 2005 Location: toronto	Michael Percy and/or Parts Connexion have what you want

17th February 2011, 02:41 PM	#5
taj diyAudio Member Join Date: Feb 2005	Digi-key also sells Mills resistors. Mills is owned by Huntington. Look for that name. ..Todd

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mills wire vs. ceramic power resistors	ro9397	Multi-Way	36	4th December 2011 04:20 AM
Mills MRA-5 resistors in tube circuits	dodo	Tubes / Valves	1	23rd April 2010 12:15 AM
WTB: Mills wirewound resistors	recstar24	Swap Meet	0	8th November 2009 06:30 PM
WTB: 1ohm 5 w Mills resistors	paulyang	Swap Meet	3	8th December 2005 06:59 AM
Mills Resistors for Aleph-x for sale !	promitheus	Group Buys	1	5th August 2005 06:42 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read