Pioneer B20FU20-51FW full rangers

vaughn · 20th January 2011, 03:50 PM

I've got a pair of these that I don't think I'm going to end up using. I had them mounted briefly in a 2.5 cu ft sealed cab but I don't really have the room to put them in something that will do them justice (i.e. Pass TL or Full/Half Chang). The condition is like new, I'll sell them for $50 plus shipping.

stevodude · 22nd January 2011, 07:45 PM

I'll take them, but would like to know if you can freight them to australia, and the freight cost.

vaughn · 22nd January 2011, 08:02 PM

Let me get a shipping quote for you...be back in a minute

vaughn · 22nd January 2011, 08:08 PM

Ok, for some reason Australia is more expensive to ship to than pretty much any other place in the world

Shipping for a 10" cube box that weighs 9lbs is $74.40 to Australia via USPS international priority mail, more than the cost of the woofers.

stevodude · 24th January 2011, 08:18 PM

Hmm thats a bit on the high side.

But considering the only other speaker i can get is the 207e for about $400 delivered from US, then $120 is probably cheap.

Can i hold that thought and get back to you by thursday.

Stevec

vaughn · 24th January 2011, 10:44 PM

No problem, it doesn't look like anyone is knocking down my door to get to these

vaughn · 1st February 2011, 03:00 PM

still available...

vaughn · 10th February 2011, 01:07 AM

still available, price drop to $40 plus shipping...

badman · 10th February 2011, 01:10 AM

Sheesh, that's a steal. Great driver, hard to find one as good anywhere near the money- especially if you tweak it. Some rope caulk on the magnet junction/frame, felt around the frame legs, a little PVA and perhaps EnAbl on the cone, phase plug.....

And you've got an entirely decent fullrange- that actually does bass and doesn't shriek!

vaughn · 10th February 2011, 01:16 AM

Dammit, SOLD! lol

I'm keeping them, I might be the first audiodork with Full Changs as a garage system but I don't see any point in giving these away...

Besides, I never really had them optimized using a sealed enclosure.

I think I'll just tweak the hell out of them and use them with this little Fisher PP 6bq5 amp

20th January 2011, 03:50 PM	#1
vaughn diyAudio Member Join Date: Feb 2008	Pioneer B20FU20-51FW full rangers I've got a pair of these that I don't think I'm going to end up using. I had them mounted briefly in a 2.5 cu ft sealed cab but I don't really have the room to put them in something that will do them justice (i.e. Pass TL or Full/Half Chang). The condition is like new, I'll sell them for $50 plus shipping.

10th February 2011, 01:10 AM	#9
badman Custom Title diyAudio Member Join Date: Sep 2003 Location: Sunny Tustin, SoCal	Sheesh, that's a steal. Great driver, hard to find one as good anywhere near the money- especially if you tweak it. Some rope caulk on the magnet junction/frame, felt around the frame legs, a little PVA and perhaps EnAbl on the cone, phase plug..... And you've got an entirely decent fullrange- that actually does bass and doesn't shriek! __________________ I write for www.enjoythemusic.com in the DIY section. You may find yourself getting a preview of a project in-progress. Be warned!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FYI Pioneer B20FU20-51FW	jackfish	Full Range	2	19th April 2009 09:38 AM
Parameters for Pioneer B20FU20-51FW	jackfish	Full Range	25	6th March 2009 08:16 PM
Pioneer B20FU20-51FW 8" Full Range Driver	gpsmithii	Swap Meet	2	30th December 2007 09:21 PM
Pioneer B20FU20-51FW 8 TL?	aznboi3644	Full Range	15	18th December 2007 10:01 AM
pioneer b20fu20-51fw	injunandrew	Full Range	11	18th April 2005 09:30 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd January 2011, 07:45 PM	#2
stevodude diyAudio Member Join Date: Aug 2004 Location: sunny Queensland	I'll take them, but would like to know if you can freight them to australia, and the freight cost.

22nd January 2011, 08:02 PM	#3
vaughn diyAudio Member Join Date: Feb 2008	Let me get a shipping quote for you...be back in a minute

22nd January 2011, 08:08 PM	#4
vaughn diyAudio Member Join Date: Feb 2008	Ok, for some reason Australia is more expensive to ship to than pretty much any other place in the world Shipping for a 10" cube box that weighs 9lbs is $74.40 to Australia via USPS international priority mail, more than the cost of the woofers.

24th January 2011, 08:18 PM	#5
stevodude diyAudio Member Join Date: Aug 2004 Location: sunny Queensland	Hmm thats a bit on the high side. But considering the only other speaker i can get is the 207e for about $400 delivered from US, then $120 is probably cheap. Can i hold that thought and get back to you by thursday. Stevec

24th January 2011, 10:44 PM	#6
vaughn diyAudio Member Join Date: Feb 2008	No problem, it doesn't look like anyone is knocking down my door to get to these

1st February 2011, 03:00 PM	#7
vaughn diyAudio Member Join Date: Feb 2008	still available...

10th February 2011, 01:07 AM	#8
vaughn diyAudio Member Join Date: Feb 2008	still available, price drop to $40 plus shipping...

10th February 2011, 01:16 AM	#10
vaughn diyAudio Member Join Date: Feb 2008	Dammit, SOLD! lol I'm keeping them, I might be the first audiodork with Full Changs as a garage system but I don't see any point in giving these away... Besides, I never really had them optimized using a sealed enclosure. I think I'll just tweak the hell out of them and use them with this little Fisher PP 6bq5 amp

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)