FS: DX Blame MKII amplifier set + power supply + heatsinks

supernet · 11:10 AM

Build on beautifull Rudi red pcb boards, with best components available: Panasonic FC capacitors for power supply bypass, Elna Cerafine caps for feedback and other applications, Mundorf Mcap as input cap, mica caps, Wima MKP caps for decoupling, Mills power resistors and for desert - transistors are mounted on black eloxated 40X40 5mm thick L profile with allready pre-drilled holes.

The circuit is tested, bias is 50 mA, offset is 0.00mV and 0.12mV...

The price for set is 150 EUR + post costs.

You can contact me on: moonaudio@gmail.com

supernet · 14th November 2010, 11:23 AM

You can also get audiophile quality power supply with dual rectifier diodes per channel (BYV32-200) - reason is to galvanic separate transformer ground from amp ground, 4 x 4700uF/63V BC components 056 series capacitors, CRC circuit and snubber circuit on input.

Price is 30 EUR + post cost for two (dual mono).

I can offer you also two Fischer elektronik heatsinks with dimensions: 160 x 50 x 75 mm. They are more than enough for one DX Blame channel. You only have to drill holes into it.

Price for two is 20 EUR + post costs.

I can offer you also a pair of vey high quality speaker conectors from Connex. They accept anything and I can be mount together or separated.

Price is 15 EUR for set (2).

My location is Europe. You can contact me on: moonaudio@gmail.com

supernet · 14th November 2010, 12:49 PM

There seems are some troubles with my local image host server, so here they are once again:

supernet · 16th November 2010, 11:20 AM

For all package buyers, there is also discount price. Tell me, what is your location and I will give you good offer with post costs included!

supernet · 23rd November 2010, 02:39 PM

Blame boards SOLD!

Heatsinks, connectors and power supply still on sale...

supernet · 29th November 2010, 10:33 PM

SOLD OUT!

14th November 2010, 11:08 AM	#1
supernet diyAudio Member Join Date: Dec 2001 Location: Europe	FS: DX Blame MKII amplifier set + power supply + heatsinks Build on beautifull Rudi red pcb boards, with best components available: Panasonic FC capacitors for power supply bypass, Elna Cerafine caps for feedback and other applications, Mundorf Mcap as input cap, mica caps, Wima MKP caps for decoupling, Mills power resistors and for desert - transistors are mounted on black eloxated 40X40 5mm thick L profile with allready pre-drilled holes. The circuit is tested, bias is 50 mA, offset is 0.00mV and 0.12mV... The price for set is 150 EUR + post costs. You can contact me on: moonaudio@gmail.com Last edited by supernet; 14th November 2010 at 11:10 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Are you ready to face strong emotions?.. Dx Blame MKII and the Supercharged release!	destroyer X	Solid State	666	12th June 2013 01:40 PM
DX BLame ES, ST, MKII, MKII Supercharged Groub Buy Interest	Mitchel	Group Buys	160	13th December 2012 01:58 PM
Dx Blame ES .... based into the Blameless, i am trying a new amplifier	destroyer X	Solid State	1826	12th February 2011 07:11 AM
Dx Blame MKII and Dx Blame MKII Supercharged released NOW!	destroyer X	Solid State	1	29th October 2010 01:00 PM
Dx Blame MKII, an obvious evolution from the Dx Blame ES/ST	destroyer X	Solid State	4	25th September 2010 06:41 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th November 2010, 11:23 AM	#2
supernet diyAudio Member Join Date: Dec 2001 Location: Europe	You can also get audiophile quality power supply with dual rectifier diodes per channel (BYV32-200) - reason is to galvanic separate transformer ground from amp ground, 4 x 4700uF/63V BC components 056 series capacitors, CRC circuit and snubber circuit on input. Price is 30 EUR + post cost for two (dual mono). I can offer you also two Fischer elektronik heatsinks with dimensions: 160 x 50 x 75 mm. They are more than enough for one DX Blame channel. You only have to drill holes into it. Price for two is 20 EUR + post costs. I can offer you also a pair of vey high quality speaker conectors from Connex. They accept anything and I can be mount together or separated. Price is 15 EUR for set (2). My location is Europe. You can contact me on: moonaudio@gmail.com

14th November 2010, 12:49 PM	#3
supernet diyAudio Member Join Date: Dec 2001 Location: Europe	There seems are some troubles with my local image host server, so here they are once again:

16th November 2010, 11:20 AM	#4
supernet diyAudio Member Join Date: Dec 2001 Location: Europe	For all package buyers, there is also discount price. Tell me, what is your location and I will give you good offer with post costs included!

23rd November 2010, 02:39 PM	#5
supernet diyAudio Member Join Date: Dec 2001 Location: Europe	Blame boards SOLD! Heatsinks, connectors and power supply still on sale...

29th November 2010, 10:33 PM	#6
supernet diyAudio Member Join Date: Dec 2001 Location: Europe	SOLD OUT!