FS: Vintage Push-Pull Tube Amplifier

nic6paul · 03:59 PM

Earlier this summer I picked up a few different tube amplifiers. One of them being a Lafayette 250A EL86 P-P amplifier. I was originally going to strip it of most of its parts and use the OPT in the Tubelab Simple PP as well as the output tubes but I have decided I should probably just sell it. It does indeed work but due to the age I would think you may want to replace out of spec resistors and all of the electrolytic caps for starters and update the power cord. The tubes that came with it are included they are as follows: 3 - Telefunken 12ax7 made in Western Germany, 2 - RCA 7199, 2 Amperex EL86, 2 EL86 unknown mfg. The part missing on this amplifier that I can tell are the six screws that hold the top cover on the amplifier. I will look out in my garage and see if I can find anything suitable. I would like to get $125 plus the cost of shipping on this.

Please see the photos below:

nic6paul · 15th November 2010, 10:23 PM

^

nic6paul · 19th November 2010, 11:48 PM

bump

jmillerdoc · 20th November 2010, 01:09 AM

YGEM

13th November 2010, 03:49 PM	#1
nic6paul diyAudio Member Join Date: Jan 2007 Location: Minnesota	FS: Vintage Push-Pull Tube Amplifier Earlier this summer I picked up a few different tube amplifiers. One of them being a Lafayette 250A EL86 P-P amplifier. I was originally going to strip it of most of its parts and use the OPT in the Tubelab Simple PP as well as the output tubes but I have decided I should probably just sell it. It does indeed work but due to the age I would think you may want to replace out of spec resistors and all of the electrolytic caps for starters and update the power cord. The tubes that came with it are included they are as follows: 3 - Telefunken 12ax7 made in Western Germany, 2 - RCA 7199, 2 Amperex EL86, 2 EL86 unknown mfg. The part missing on this amplifier that I can tell are the six screws that hold the top cover on the amplifier. I will look out in my garage and see if I can find anything suitable. I would like to get $125 plus the cost of shipping on this. Please see the photos below: __________________ - Nic Last edited by nic6paul; 13th November 2010 at 03:59 PM.

15th November 2010, 10:23 PM	#2
nic6paul diyAudio Member Join Date: Jan 2007 Location: Minnesota	^ __________________ - Nic

19th November 2010, 11:48 PM	#3
nic6paul diyAudio Member Join Date: Jan 2007 Location: Minnesota	bump __________________ - Nic

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vintage V-FETs in class-A amplifier with complementary push-pull output	R-K Rønningstad	Pass Labs	25	25th October 2010 01:40 PM
Reason for capacitive coupling in vintage push-pull stage	Elvee	Solid State	15	17th July 2010 06:39 AM
MA 6P1 6AQ5 Push-Pull Valve Tube Integrated Amplifier	bitemeboat	Tubes / Valves	6	4th May 2010 02:03 AM
Bell 2420 tube amplifier. Bias question. 6v6 push pull	The Donk!	Tubes / Valves	3	22nd May 2008 02:36 AM
New design: 12V push-pull tube amplifier	engels	Tubes / Valves	3	20th September 2007 03:02 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th November 2010, 01:09 AM	#4
jmillerdoc diyAudio Member Join Date: Mar 2009 Location: Lawton, OK, USA	YGEM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read