Omron G6H-2 12VDC relays

[Russellc]

Relays and LEDs are here. Thanks for the effort!

russellc

[TheShaman]

2nd round

Name...relays...leds...location

JBdV....21...0...Holland
qusp....6...0...Aussieland
johnm... 7 relays.... 1 SET of LEDs...GB
RKH ... 7 relays.... 1 SET of LEDs...USA
sklimek...2 relays...2 SET of LEDs...USA
Grimberg ... 7 relays...0...USA
Ginum...10 relays...0 leds...Lithuania
TheShaman ... 4 relays ... 4 SETS of LEDs ... Greece

For additions to this list, please copy and paste with your added info.

[Ed LaFontaine]

I feel obligated to advise before too much more interest is expressed; The led sets required a lot more time to assemble than I had anticipated. I need to raise the price to maintain what I feel to be an equitable arrangement.

I am measuring millivolts. The strings have been matched within a few millivolts, many better. I allow what I feel to be an appropriate amount of time for the devices to "settle" to a reading when hooked up. The validity of this has been confirmed through the number of times I have walked away from the set-up for an extended period and returned to find no more than 1-2 millivolt change.
These leds are measured for MY table top ambient conditions. This is very likely different than what they will experience in our assemblies. Each led may have a positive or negative Tc. I point out these variables to inform you that the match in your assembly may not be as close as the "paper" match indicated in the sets.
I look forward to your measurement/confirmation of accuracy. I set out to provide parts that allow the circuit to perform to its potential. I think the other variables within our assemblies will have a greater effect than the variability in the led sets. My hope and expectation is for results that fall in a range of a few tenths of a %.

Your interest is noted. Quantities can be changed when I invoice.

I will charge $6.50 for each led set in round 2.

[Ed LaFontaine]

erikdebier, Thank You for your response

ramallo, ygm, I need your address

[Ed LaFontaine]

1st round

The final first round packages are complete and will be in the hands of the US Postal System tomorrow morning.

[labjr]

Anyone know what a G6H-2-116 is? I saw them on ebay, but I don't know what the difference is from a G6H-2

[Ed LaFontaine]

2nd round

Name...relays...leds...location

JBdV......21...0...Holland
qusp......6.....0...Aussieland
johnm... 7 relays.... 1 SET of LEDs...GB
RKH ..... 7 relays.... 1 SET of LEDs...USA
sklimek...2 relays.....2 SET of LEDs...USA
Grimberg ... 7 relays...0...USA
Ginum.......10 relays...0 leds.....Lithuania
TheShaman ... 4 relays ... 4 SETS of LEDs ... Greece
bkdog.........0 relays.........4 set of leds....GB

For additions to this list, please copy and paste with your added info.

[qusp]

OK just popping my head in to confirm that whenever you are ready to send off the relay order i'm in, I can always use more of these relays, even though I have already filled the positions the 6 I earmarked here were for.

[Ed LaFontaine]

qusp,

You have 6? Still want 6? Want more?

Please edit the 2nd round list.

Everyone will have an opportunity to make changes in response to the invoice I will send.

[Ed LaFontaine]

Packages received:

ichiban (US)
Russellc (US)
av-trouvaille (Rotterdam)

Please confirm when they arrive.