FS: Pass Labs Parts Lot Caps, Toroids, Parts - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 27th September 2010, 08:46 PM   #1
diyAudio Member
 
Join Date: Mar 2005
Location: Fort Wayne, IN
Send a message via AIM to Eclipse911t
Default FS: Pass Labs Parts Lot Caps, Toroids, Parts

I have been totally out of the amp building hobby for about 5 years now and have been moving these pieces and parts from place to place in the mean time. Please someone make me an offer on part, all, or any of this stuff.

8ea of the 2003 DAH output boards designed for 6 Fets each never used.
2ea brand new Aleph-X rev 1.0 boards.
2ea Mini Aleph BrianGT boards that have been used.
16ea 34,000 uF 40vDC Caps
12ea Large Extruded Heatsinks
12ea Small Extruded Heatsinks
12ea Dale RH-50 50w .412 ohm 1% Resistors
4ea 625va Avel Lindberg Toroids 25v
1ea Smaller, maybe 250va 15v toroid
a few IRF9610's
9ea IRF9610L's
About 50ea IRFP240's
A few IR 452XB rectifiers.
75 - 90ea 0.47 ohm 3w 5% Metal Oxide
10ea STM CL-60 Thermistors
2ea 10A circuit breaker power switches.
2ea Neutrik Powercon Male
4ea Neutrik Powercon Female
4ea very high quality binding posts
There are also some female RCA jacks and XLR jacks, switches, fuse holders, and cheap binding posts along with a lot of small component pieces that have never been touched.

I'm in Fort Wayne, IN and will drive 2 hours to meet whomever to rid my self of this stuff. I wish I had the passion and know how that I expected to have when I made these purchases in college, but I've since become a home automation programmer (Crestron) and have left DIY Audio. I really don't have anymore information than what I listed since it's been so long since I've looked at any electronics, but hopefully the pictures fill in the gaps.

Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
__________________
"I'm against picketing but I don't know how to show it." ~Mitch Hedberg
  Reply With Quote
Old 27th September 2010, 08:53 PM   #2
diyAudio Member
 
Tripmaster's Avatar
 
Join Date: Feb 2008
Location: UK
I wished I lived in the US
__________________
Richard
My photostream: http://www.flickr.com/photos/59839778@N04/
  Reply With Quote
Old 27th September 2010, 10:40 PM   #3
diyAudio Member
 
Join Date: Mar 2005
Location: Fort Wayne, IN
Send a message via AIM to Eclipse911t
I'll ship anywhere. Are you near Manchester? I have family there I could ship to and possibly save you some post.
__________________
"I'm against picketing but I don't know how to show it." ~Mitch Hedberg
  Reply With Quote
Old 28th September 2010, 12:35 AM   #4
diyAudio Member
 
Join Date: Jul 2004
Location: North Carolina
pm sent.

Anand.
  Reply With Quote
Old 28th September 2010, 02:09 AM   #5
diyAudio Member
 
Join Date: Mar 2005
Location: Fort Wayne, IN
Send a message via AIM to Eclipse911t
The big toroids are $50 the little one is $30. The heatsinks and caps, just make me an offer.
What's reasonable, $10 each?

I already sold the following items:

2ea brand new Aleph-X rev 1.0 boards.
1- 625va Avel Lindberg Toroids 25v
ALL IRF9610's
ALL IRF9610L's
ALL 50ea IRFP240's
ALL 0.47 ohm 3w 5% Metal Oxide
ALL Dale RH-50 50w .412 ohm 1% Resistors
ALL STM CL-60 Thermistors
__________________
"I'm against picketing but I don't know how to show it." ~Mitch Hedberg
  Reply With Quote
Old 28th September 2010, 03:02 AM   #6
diyAudio Member
 
Join Date: Mar 2005
Location: Fort Wayne, IN
Send a message via AIM to Eclipse911t
SOLD the following:
All the fuses, holders and bridge rectifiers, mosfet mounting hardware.
__________________
"I'm against picketing but I don't know how to show it." ~Mitch Hedberg
  Reply With Quote
Old 28th September 2010, 03:38 AM   #7
ra7 is offline ra7  United States
diyAudio Member
 
Join Date: Feb 2009
Blog Entries: 1
hehe... thanks!
  Reply With Quote
Old 28th September 2010, 04:41 AM   #8
igwt is offline igwt  United States
diyAudio Member
 
Join Date: Mar 2009
email and pm sent

Last edited by igwt; 28th September 2010 at 04:50 AM.
  Reply With Quote
Old 28th September 2010, 01:40 PM   #9
diyAudio Member
 
jmillerdoc's Avatar
 
Join Date: Mar 2009
Location: Lawton, OK, USA
Email sent
  Reply With Quote
Old 28th September 2010, 04:25 PM   #10
diyAudio Member
 
Join Date: Mar 2005
Location: Fort Wayne, IN
Send a message via AIM to Eclipse911t
I still have th following available:

8ea of the 2003 DAH output boards designed for 6 Fets each never used.
2ea Mini Aleph BrianGT boards that have been used.
16ea 34,000 uF 40vDC Caps
12ea Large Extruded Heatsinks
12ea Small Extruded Heatsinks
3ea 625va Avel Lindberg Toroids 25v
1ea Smaller, maybe 250 to 300va 15v toroid
2ea 10A circuit breaker power switches.
2ea Neutrik Powercon Male
4ea Neutrik Powercon Female
4ea very high quality binding posts

There are also some female RCA jacks and XLR jacks, switches, and cheap binding posts.
__________________
"I'm against picketing but I don't know how to show it." ~Mitch Hedberg
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
OTL Circlotron Parts, Toroids, Caps, Tubes. dshortt9 Swap Meet 0 12th January 2010 09:14 PM
FS: Zen IV parts, chassis, toroids, etc vsr123 Swap Meet 6 8th March 2005 07:16 PM
Parts for Pass Labs Pearl Phono Amp OldmanJim Swap Meet 3 24th June 2003 09:04 PM


New To Site? Need Help?

All times are GMT. The time now is 11:00 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2