• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Scan Speak Revelator 12m/4631G00 (pair)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hey all,

I purchased these a few years ago as part of 3-way active build that I never ended up getting around to. I recently decided to complete the project, but switched to the Zaph ZRT 2.5 to utilize my four 18W/8531G drivers.

As such, I'm left with my pair of 12M/4631G drivers that have never been used. I hooked them up briefly free-air to a low-level highpassed amp output to ensure there was nothing obviously wrong with them (shorted/open/siezed VC, etc) when I first received them, but that's it. They have never been mounted in a baffle, never been fed more than a tiny fraction of a watt (from that initial test), etc. They've simply been sitting in their original box in my closet for about 3 years.

I would like to get close to what I paid for them since they have literally never been used. They sell for $570 for the pair on Madisound now, they used to be cheaper. I'm looking to get around $400 for mine. I have some pictures, let me know if you want more. They will be delivered in the same OEM packaging I received them in (same as what's pictured).

http://www.thesuicidaleggroll.com/hosting/DSC_0361.JPG
http://www.thesuicidaleggroll.com/hosting/DSC_0362.JPG
http://www.thesuicidaleggroll.com/hosting/DSC_0364.JPG
http://www.thesuicidaleggroll.com/hosting/DSC_0365.JPG

What you see in that last picture isn't anything wrong with the cone, it's just a little dusty. I'm not sure how it got so dusty sitting in that box, but apparently dust will find a way...
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.